SPECIFICATION
MODEL
DC VOLTAGE
RATED CURRENT
CURRENT RANGE
RATED POWER
OUTPUT
VOLTAGE ADJ. RANGE
LINE REGULATION
LOAD REGULATION
SETUP, RISE, HOLD TIME
VOLTAGE RANGE
FREQUENCY RANGE
EFFICIENCY(Typ.)
AC CURRENT
INPUT
INRUSH CURRENT(max.)
LEAKAGE CURRENT
SAFETY STANDARDS
WORKING TEMP.
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
MTBF
DIMENSION
OTHERS
NOTE
PACKING
OVER LOAD
12V
15V
24V
5A
4A
2.5A
0 ~ 5A
0 ~ 4A
0 ~ 2.5A
60W
60W
120mVp-p
150mVp-p
150mVp-p
1.0%
10.8 ~ 13.2V
13.5 ~ 16.5V
21.6 ~ 26.4V
1.0%
1.0%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
300ms, 50ms, 80ms / 230VAC
800ms, 50ms, 10ms / 115VAC at full load
85 ~ 264VAC
120 ~ 370VDC
47 ~ 63Hz
73%
77%
17.25 ~ 20.25
79%
27.6 ~ 32.4V
76%
13.8 ~ 16.2V
2A/115VAC
1A/230VAC
COLD START 30A/115VAC
60A/230VAC
<3.5mA / 240VAC
105 ~ 150% rated output power
5.75 ~ 6.75V
Protection type : Hiccup mode, recovers automatically after fault condition is removed.
Protection type : Hiccup mode, recovers automatically after fault condition is removed.
UL1012, UL1950, TUV EN60950 Approved
Compliance to EN55022 (CISPR22) Class B
-10 ~ +60
(Refer to output load derating curve)
20 ~ 90% RH non-condensing
-20 ~ +85
, 10 ~ 95% RH
0.03%/
(0 ~ 50
)
10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
316.2K hrs min.
MIL-HDBK-217F (25
)
159*97*38mm (L*W*H)
5V
12A
0 ~ 12A
60W
60W
120mVp-p
2.0%
0.5%
1.0%
S-60-5
S-60-12
S-60-15
S-60-24
0.51Kg; 24pcs/13.1Kg/0.7CUFT
OVER VOLTAGE
HARMONIC CURRENT
EMS IMMUNITY
Compliance to EN61000-3-2,-3
Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, Light industry level, criteria A
4.75 ~ 5.5V
60W Single Output Switching Power Supply
Universal AC input/Full range
Protections:Short circuit/Over load/Over voltage
Cooling by free air convection
100% full load burn-in test
Fixed switching frequency at 50KHz
2 years warranty
Features :
S - 6 0
s e r i e s
RIPPLE & NOISE (max.)
Note.2
VOLTAGE TOLERANCE
Note.3
EMI CONDUCTION & RADIATION
ENVIRONMENT
SAFETY &
EMC
(Note 4)
PROTECTION
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
I/P-O/P:3KVAC
I/P-FG:1.5KVAC
O/P-FG:0.5KVAC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25
of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
TOTAL POWER INT'L
PDF 
ZIP