UNIVERSAL INPUT AC TO DC EXTERNAL WALLMOUNT &
DESKTOP ADAPTORS SINGLE & DUAL OUTPUT 10-12 WATTS
SWITCHING POWER SUPPLIES TPES10 & TPES10B SERIES
FEATURES:
UNIVERSAL INPUT
WALLMOUNT OR DESKTOP ADAPTOR
DIVERSE AC PLUG AVAILABLE
TO MEET UNIVERSAL SAFETY STANDARDS
EMI MEET EN55022/FCC CLASS B
CE MARKING COMPLIANCE
OUTPUT SPECIFICATION
Output Voltage: See Ratings Chart.
Output Current: See Ratings Chart.
Output Wattage: 10 ~ 12Watts typical.
Output Connector: Optional.
Line Regulation: 0.1% typical.
Load Regulation for TPES10 and TPES10B Single O/P:
1.5 ~ 3.0% typical.
Load Regulation for TPES10 Series Dual O/P:
Main O/P VO1 1.5 ~ 3.0% typical.
Aux. O/P VO2 3.0 ~ 5.0% typical.
Noise & Ripple: Typical 1.0 % peak to peak.
OVP: Built-in, Zener diode clamp.
Overload Protection: Typ.125-150% of max. power overrange
or short circuit, power foldback & self-recovering.
SPECIFICATION
INPUT SPECIFICATION
Input Voltage For TPES10 Series: 90-264Vac typical.
Input Voltage For TPES10B Series: 90-132Vac typical.
Input Connector for TPES10 Series:
Wallmount Format: WM0,1,2 (USA/Japan)/ WM3 (Euro-stecker)/
WM4 (Schuko-stecker)/ WM5(UK)/WM6, 6G(Australia)
Desktop Format: IEC320 Inlet Type DT7-3P or DT8-2P.
Mouse Power Pig-Tail: PT1/2/3/4/5/6/7.
Input Connector for TPES10B Series: WM1 (USA/Japan) only.
Input Frequency: 47 ~ 63Hz.
Inrush Current: Typical 48A @230Vac or 27.8A @230Vac
by adding thermister.
Input Current: Typical 0.3A@115Vac/0.10A@230Vac.
Dielectric Withstand: Meet IEC950.
EMI: Meet EN55022 / FCC Class B.
Hold-up Time: 15mS @115Vac. / 60mS @230Vac typical.
GENERAL SPECIFICATION
Efficiency: 70 ~75% typical.
Switching Frequency: TPES10 approximate 40-50K Hz.
TPES10B approximate 50-200K Hz.
Circuit Topology: Fixed Frequency Flyback ckt. for TPES10 series.
Free Running Flyback ckt.for TPES10B series.
Transient Response: Output voltage returns in less than 3mS
following a 25% load change.
Power Density: 1.3-1.56Watts / Inch
3
.
Operating Temperature: 0 ~ +40C.
Storage Temperature: -20C ~ +85C.
Temperature Coefficient: 0.04% /C.
Cooling: Free air convection.
Construction: Impact resistant thermo- plastic enclosure case.
Construction: Wallmount or Desktop Format.
Safety Standard: UL1950/EN60950, Class II.
Class I available for WM2,5,6G /DT7/PT2,4,5,7
Medical Use: TPES10M-12004-G-7 UL2601/EN60601.
Notes: (1) All measurements are at nominal input, full load, and +25C unless otherwise specified.
(2) Load regulation is measured at 115Vac or 230Vac in percentage to indicate the change in output voltage as the load is varied from half load to
full load (unit %). For the multi-output, the main output remains 50% load and other aux. output remains 20% load.
(3) The exact obtainable load regulation depends upon the output load current & cord selected. Upper data are for 6 ft.(2 meters)cord
AWG#18/20 wires with PF or PD type connector.
For the details of safety, please consult the factory
TOTAL POWER INT'L
TOTAL POWER INT'L Tel: 877-646-0900 Fax: 978-453-7395
Email: sales@total-power.com http://www.total-power.com
-1-
MODEL NO. DESCRIPTION:
TPES10 X X X
YY
N S
SINGLE OUTPUT: [0] for no Aux. O/P.
DUAL
AUX.
O/P
SET:[A]+5V,
[B]+12V,
[C]+15V,
[D]+18V, [E]+24V [F]-5V,
[G]-12V,[H]-15V,[I]-18V,[J]-24V
OUTPUT CURRENT
OUTPUT VOLTAGE
SERIES NAME (Total Power External Switcher): About 10W.
AC PLUG TYPE:
[0] WM0 (Fold-out ), [1] WM1, [2]WM2, [3]WM3,
[4] WM4, [5] WM5, [6] WM6, [6G] WM6G
[7] DT7 (IEC320 3-pin or 3L-pin),
[8] DT8 (IEC320 2-pin).
[A] PT1, [B] PT2, [C] PT3, [D] PT4
[E] PT5, [F] PT6, [G] PT7,
OUTPUT VOLTAGE/CURRENT RATINGS CHART
DEFINED OUTPUT VOLTAGE (Vdc)
OUTPUT VOLTAGE (Vdc) / CURRENT (A)
3.3 VdcAny Voltage 12.0Vdc
3.3V/2.5A, 3.4-5.0V/2.0A, 5.1-5.9V/1.9-1.7A, 6.0-6.3V/ 1.6A,
6.4-6.7V/1.6-1.5A, 6.8-7.2V/1.4A, 7.4-7.7V/1.3A,
7.8-8.4V/1.2A, 8.5-8.9V/1.1A, 9.0-12V/1.0A.
Special: 6.0-6.5V/2.0A
12.0VdcAny Voltage 24.0Vdc
12.1-13.3V/0.9A, 13.4-15.0V/0.8A, 15.1-17.1V/0.7A,
17.2-20.0V /0.6A, 20.1-24.0V/0.5A. Max. Output: 12.0 W.
Note: Refer to the upper Chart or specify the V/A ratings and consult factory for the exact Model No.
SINGLE OUTPUT
(Model No. for examples. )
MODEL NO. AC INPUT AC PLUG O/P VOLTAGE (Vdc) O/P CURRENT(A) FORMAT
TPES10-03325-0-1 90-264Vac WM1 3.3V 2.5A
Wallmount
TPES10-03420-0-3 90-264Vac WM3 3.4V 2.0A
Wallmount
TPES10-05020-0-5 90-264Vac WM5 5.0V 2.0A
Wallmount
TPES10-06016-0-6 90-264Vac WM6 6.0V 1.6A
Wallmount
TPES10-12010-0-0 90-264Vac WM0 12.0V 1.0A
Wallmount
TPES10-07014-0-7 90-264Vac DT7 7.0V 1.4A
Desktop
TPES10-08511-0-8 90-264Vac DT8 8.5V 1.1A
Desktop
TPES10-09010-0-A 90-264Vac PT1 9.0V 1.0A
Mouse-PT
TPES10-10010-0-B 90-264Vac PT2 10.0V 1.0A
Mouse-PT
TPES10-12010-0-C 90-264Vac PT3 12.0V 1.0A
Mouse-PT
TPES10-13808-0-D 90-264Vac PT4 13.8V 0.8A
Mouse-PT
TPES10-15008-0-E 90-264Vac PT5 15.0V 0.8A
Mouse-PT
TPES10-16007-0-F 90-264Vac PT6 16.0V 0.7A
Mouse-PT
TPES10-18006-0-G 90-264Vac PT7 18.0V 0.6A
Mouse-PT
TPES10-06020-0-0 90-264Vac WM0 6.0V 2.0A
Wallmount
TPES10-06020-0-1 90-264Vac WM1 6.0V 2.0A
Wallmount
TPES10-24005-0-2 90-264Vac WM2 24.0V 0.5A
Wallmount
DUAL OUTPUT V/A CHART
OUTPUT RAIL OUTPUT VOLTAGE (Vdc) / CURRENT (A)
Main O/P VO1
5.0V/1.0A, 5.1-5.9V/0.9A, 6.0-7.5V/0.8A, 7.6-9.0V/0.7A,
9.1-12.0V/0.6A, 12.1-14.0V/0.5A, 14.1-20.0V/0.4A.
Aux. O/P VO2
5V/0.6A, 12V/0.3A, 15V/0.2A, 18V/0.2A, 24V/0.1A.
Note: Refer to the upper Chart or specify the V/A ratings and consult factory for the exact Model No.
TOTAL POWER INT'L Tel: 877-646-0900 Fax: 978-453-7395
Email: sales@total-power.com http://www.total-power.com
-2-
TOTAL POWER INT'L Tel: 877-646-0900 Fax: 978-453-7395
Email: sales@total-power.com http://www.total-power.com
-2-
TPES10B SERIES
DUAL OUTPUT
(Model No. for examples. )
MAIN O/P VO1
AUX. O/P VO2
MODEL NO.
AC INPUT AC PLUG
(Vdc) (A) (Vdc)
(A)
FORMAT
TPES10-03310-A-1 90-264Vac WM1 +3.3V 1.0A +
5.0V
0.6A
Wallmount
TPES10-05010-B-3 90-264Vac WM3 +5.0V 1.0A +12.0V 0.3A Wallmount
TPES10-05209-C-5 90-264Vac WM5 +5.2V 0.9A +15.0V 0.2A Wallmount
TPES10-06008-D-6 90-264Vac WM6 +6.0V 0.8A +18.0V 0.2A Wallmount
TPES10-09007-E-7 90-264Vac DT7 +9.0V 0.7A +24.0V 0.1A Desktop
TPES10-12006-F-A 90-264Vac PT1 +12.0V 0.6A -5.0V 0.6A Mouse PT
TPES10-13505-G-B 90-264Vac PT2 +13.5V 0.5A -12.0V 0.3A Mouse PT
TPES10-15004-H-C 90-264Vac PT3 +15.0V 0.4A -15.0V 0.2A Mouse PT
TPES10-18004-I-E 90-264Vac PT5 +18.0V 0.4A -18.0V 0.2A Mouse PT
TPES10-20004-J-G 90-264Vac PT7 +20.0V 0.4A -24.0V 0.1A Mouse PT
TPES10B SERIES
MODEL NO. DESCRIPTION:
TPES10B X X X YYY 0 S
[1] ONLY FOR WM1 AC PLUG.
[0] FOR SINGLE OUTPUT ONLY.
OUTPUT CURRENT
OUTPUT VOLTAGE
SERIES NAME (Total Power External Switcher) : ABOUT 10W
OUTPUT VOLTAGE/CURRENT RATINGS CHART
DEFINED OUTPUT VOLTAGE(Vdc)
OUTPUT VOLTAGE (Vdc) / CURRENT (A)
3.0 VdcAny voltage 9.0 Vdc
3.0-5.0V/2.0A, 5.1-5.3V/1.9A, 5.4-5.6V/1.8A,
5.7-5.9V/1.7A, 6.0-6.3V/1.6A, 6.4V-6.7V/1.5A,
6.8-7.2V/1.4A, 7.3-7.7V/1.3A 7.8-8.4V/1.2A,
8.5-8.9V/1.1A.
9.0VdcAny voltage 30.0 Vdc
9.0-12.0V/1.0A, 12.1-13.3V/0.9A, 13.4-15.0V/0.8A,
15.1-17.1V /0.7A, 17.2-20.0V/0.6A, 20.1-24.0V/0.5A,
24.1-30.0V/0.4A.
Note: Refer to the upper Chart or specify the V/A ratings and consult factory for the exact Model No.
SINGLE OUTPUT
(Model No. for examples)
MODEL NO.
AC INPUT
AC PLUG
O/P VOLTAGE (Vdc)
O/P CURRENT (A)
FORMAT
TPES10B-03320-0-1 90-132Vac WM1 3.3V 2.0A Wallmount
TPES10B-05020-0-1 90-132Vac WM1 5.0V 2.0A Wallmount
TPES10B-06316-0-1 90-132Vac WM1 6.3V 1.6A Wallmount
TPES10B-07014-0-1 90-132Vac WM1 7.0V 1.4A Wallmount
TPES10B-09510-0-1 90-132Vac WM1 9.5V 1.0A Wallmount
TPES10B-12010-0-1 90-132Vac WM1 12.0V 1.0A Wallmount
TPES10B-15008-0-1 90-132Vac WM1 15.0V 0.8A Wallmount
TPES10B-18006-0-1 90-132Vac WM1 18.0V 0.6A Wallmount
TPES10B-24005-0-1 90-132Vac WM1 24.0V 0.5A Wallmount
TPES10B-30004-0-1 90-132Vac WM1 30.0V 0.4A Wallmount
TOTAL POWER INT'L Tel: 877-646-0900 Fax: 978-453-7395
Email: sales@total-power.com http://www.total-power.com
-3-
PDF 
ZIP