R192P OC-192/STM-64 Lightwave Receiver
with Improved Sensitivity (18 dBm)
Preliminary Data Sheet, Rev. 5
February 2003
TriQuint Optoelectronics
Featuring improved sensitivity for optimum performance in
noisy, amplified systems, the R192P Receiver is manufactured
in a compact, 16-pin surface-mount package (above), and is
also available with a convenient mounting bracket (below).
Features
High data rate capability, 10.7 Gb/s
PIN photodetector
Fully operational through the 1.3
m to 1.6 m wave-
length range
Improved typical sensitivity of 18 dBm
Single-mode fiber pigtail with ST, SC, LC, or
FC/PC optical connectors
Operating case temperature range:
0 C to 70 C
50
differential data output, with offset control
Package options:
-- Space-sensitive package without mounting
bracket (ideal for transponder and transceiver
applications)
-- With mounting bracket
Applications
Line terminal equipment
High-speed networks up to 10.7 Gb/s
SONET/SDH OC-192/STM-64 telecommunications
applications
Extended-reach datacom and telecom applications
riQ
T
uin
t
SE
MI
CO
ND
UC
TO
R
R1
92
P
riQ
T
uin
t
SEM
ICO
NDU
CTO
R
Rec
eiv
er M
odu
le
R19
2P
R192P OC-192/STM-64 Lightwave Receiver
Preliminary Data Sheet, Rev. 5
with Improved Sensitivity (18 dBm)
February 2003
2
2
For additional information and latest specifications, see our website: www.triquint.com
Description
Receiver Operation
The R192P 10.7 Gb/s fiber-optic receiver consists of a
high-speed PIN photodetector and a wide-band linear
preamp in a pigtailed, surface-mount metal package. It
is designed for use in single-mode, high-speed tele-
communication applications at the SONET OC-192
and the ITU-T SDH STM-64 data rate of
9.95328 Gb/s.
At 10.7 Gb/s, the typical room temperature sensitivity
measured at a BER of 1 x 10
10
is 18 dBm. The oper-
ating case temperature range for the receiver is 0 C to
70 C.
The receiver is manufactured in a compact, 16-pin sur-
face-mount package with a single-mode optical fiber
pigtail. The fiber pigtail is internally beveled for low
return loss and is available with ST, SC, LC, or FC-PC
optical connectors.
The dc levels of the differential outputs can be adjusted
relative to each other for optimum sensitivity in noisy,
amplified systems. These outputs are centered around
a dc level of typically 0.45 V. The TIA requires only a
5 V power supply for operation. The PIN photodiode
requires a nominal bias voltage of 5 V to 10 V at less
than 1 mA.
Pin Information
Electrostatic Discharge
CAUTION: This device is susceptible to damage as
a result of electrostatic discharge. Take
proper precautions during both handling
and testing. Follow guidelines such as
EIA
Standard EIA-625.
TriQuint Semiconductor employs a human-body model
(HBM) for ESD-susceptibility testing and protection-de-
sign evaluation. ESD voltage thresholds are dependent
on the critical parameters used to define the model. A
standard HBM (resistance = 1.5 k
, capacitance =
100 pF) is widely used and can be used for comparison
purposes.
Table 1. Pin Descriptions
Pin Number
Name
1
PIN Bias
2
GND
3
V
EE
4
NC
5
NC
6
NC
7
GND
8
DATAN
9
DATA
10
GND
11
NC
12
OFF
13
+OFF
14
Feedback Input Threshold Control
15
GND
16
Thermistor
For additional information and latest specifications, see our website: www.triquint.com
3
Preliminary Data Sheet, Rev. 5
R192P OC-192/STM-64 Lightwave Receiver
February 2003
with Improved Sensitivity (18 dBm)
Absolute Maximum Ratings
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are abso-
lute stress ratings only. Functional operation of the device is not implied at these or any other conditions in excess
of those given in the operations section of the data sheet. Exposure to absolute maximum ratings for extended
periods can adversely affect device reliability.
* Device is normally reverse biased. Forward biasing the photodiode can compromise device performance and reliability.
Optical Characteristics
Parameter
Symbol
Min
Max
Unit
Supply Voltages:
Negative Supply
V
EE
4.7
5.7
V
Photodiode Supply Current:
Forward*
Reverse
--
--
--
--
20
2
mA
mA
Optical Input Power
P
MAX
--
8
dBm
Operating Case Temperature
T
C
0
70
C
Storage Temperature
T
C
40
85
C
Lead Soldering Temperature
--
--
250
C
Lead Soldering Time
--
--
10
s
Table 2. Optical Characteristics (T
A
= 25 C)
Parameter
Symbol
Min
Typ
Max
Unit
Optical Wavelength
1.250
--
1.615
m
Sensitivity (10.7 Gb/s, 2
31
1 PRBS, 1 x 10
10
BER,
1310 nm <
< 1550 nm)
P
LOW
--
18
17
dBm
Maximum Optical Input Power (10.7 Gb/s, 2
31
1 PRBS,
1 x 10
10
BER), V
PIN
= 5 V
P
HIGH
0
1
--
dBm
Optical Return Loss
--
--
30
27
dB
Responsivity of PIN,
= 1.55 m R
PIN
0.7
0.8
--
A/W
Total Dark Current
I
D
--
0.3
--
nA
4
For additional information and latest specifications, see our website: www.triquint.com
R192P OC-192/STM-64 Lightwave Receiver
Preliminary Data Sheet, Rev. 5
with Improved Sensitivity (18 dBm)
February 2003
Electrical Characteristics
*
Table 3. Electrical Characteristics (T
A
= 25 C)
Parameter
Symbol
Min
Typ
Max
Unit
dc Power Supply Voltages:
Negative Supply
PIN Bias
V
EE
V
PIN
4.94
5
5.2
9
5.46
13
V
V
dc Power Supply Currents:
Negative Supply
PIN Bias
I
EE
I
PIN
--
--
80
--
110
2
mA
mA
Power Dissipation
P
DISS
--
--
0.6
W
Transimpedance:
*
I
PH
500 A
Note: The output voltage increases linearly up to
750
Ap-p of input current and is operational
up to 2.2 mAp-p of input current.
Conditions: single-ended, 50
load, low fre-
quency.
T
Z
550
700
900
Average Equivalent Input Noise Spectral Density
(Bandwidth 100 KHz to 15 GHz)
--
--
14
--
pA/
Hz
Summed Equivalent Noise Power
--
--
1400
--
nA
rms
Low Frequency Cutoff
f
L
--
25
--
kHz
Bandwidth
BW
8.5
10
--
GHz
Rolloff (F
3
dB
to F
3
dB
+
5 GHz)
--
--
20
--
dB
Peaking
--
--
2
--
dB
Group Delay:
0.2 GHz--5 GHz
0.2 GHz--8 GHz
--
--
--
15
20
--
--
ps
ps
Output Return Loss:
0 GHz--6 GHz
0 GHz--8 GHz
S
22
--
--
>10
>8
--
--
dB
dB
Transimpedance, T
Z
V
PP
I
PH AVG
(
)
--------------------
, where I
PH AVG
(
)
=
= the average photodiode current.
For additional information and latest specifications, see our website: www.triquint.com
5
Preliminary Data Sheet, Rev. 5
R192P OC-192/STM-64 Lightwave Receiver
February 2003
with Improved Sensitivity (18 dBm)
Outline Diagrams
Outline Drawing, Package Style A
Dimensions are in inches and (millimeters).
1
6
0.375
(9.53)
0.611
(15.51)
0.037
(0.95)
0.050
(1.27)
1.017
(25.83)
1.174
(29.82)
7
10
11
16
DETAIL "B"
4 x 0.087(2.20)
0.333
(8.45)
0.050
(1.27)
0.608
(15.45)
0.797
(20.25)
0.097
(2.46)
0.260
(6.60)
0.500
(12.70)
0.150
(3.80)
0.043
(1.10)
0.042
(1.10)
SECTION AA
0.150
(3.80)
0.272
(6.90)
2.010 REF.
(51.05)
DETAIL B
0.016
(0.40)
0.008
(0.20)
0.025
(0.64)
0.125
(3.18)
A
A
0.079
(2.00)
1-1237(F)
6
For additional information and latest specifications, see our website: www.triquint.com
R192P OC-192/STM-64 Lightwave Receiver
Preliminary Data Sheet, Rev. 5
with Improved Sensitivity (18 dBm)
February 2003
Outline Diagrams
(continued)
Outline Drawing, Package Style N
Dimensions are in inches and (millimeters).
1
6
0.170
(4.32)
0.050
(1.27)
0.175
(4.44)
0.500
(12.70)
7
10
11
16
0.260
(6.60)
0.500
(12.70)
0.150
(3.80)
0.043
(1.10)
0.042
(1.10)
SECTION A-A
0.146
(3.70)
0.272
(6.90)
A
0.060
(1.52)
0.156
(3.95)
0.606
(15.38)
0.087
(2.22)
A
0.020
(0.51)
0.050
(1.27)
0.569
(14.45)
1.135
(28.84)
0.354
(9.00)
0.611
(15.51)
0.004
(0.100)
0.037
(0.95)
0.354
(9.00)
0.611
(15.51)
0.157
(4.00)
0.276
(7.00)
2 x 0.008
(0.20)
2 x 0.016
(0.40)
0.013
(0.32)
0.025
(0.64)
0.063
(1.59)
0.125
(3.18)
0.315
(8.00)
1-1236(F)
Additional Information
For the latest specifications, additional product information, worldwide sales and distribution locations, and information about TriQuint:
Web: www.triquint.com
Tel: (503) 615-9000
E-mail: info_opto@tqs.com
Fax: (503) 615-8902
For technical questions and additional information on specific applications:
E-mail: info_opto@tqs.com
The information provided herein is believed to be reliable; TriQuint assumes no liability for inaccuracies or omissions. TriQuint assumes no responsibility for the use of this information, and all
such information shall be entirely at the user's own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein are
implied or granted to any third party.
TriQuint does not authorize or warranty any TriQuint product for use in life-support devices and/or systems.
Copyright 2003 TriQuint Semiconductor Inc. All rights reserved.
DS01-064-5 Revision 1.1, February, 2003
R192P OC-192/STM-64 Lightwave Receiver
Preliminary Data Sheet, Rev. 5
with Improved Sensitivity (18 dBm)
February 2003
Ordering Information
Table 4. Ordering Information
1
Description
Product Code
Package Style
Connector
Comcode
R192P-Type OC-192/STM-64
Lightwave Receiver
R192PDAA A
SC
108668815
R192PGAA
A
FC
108668849
R192PSAA
A
LC
108989435
R192PDAN
N
SC
108940412
R192PGAN
N
FC
700020049
R192PSAN
N
LC
108989443
EIA is a registered trademark of the Electronic Industries Association.
1. For additional ordering information, please contact a TriQuint account manager.
PDF 
ZIP