page
1
phone: 360.260.2468
l
sales: 800.736.0194
l
fax: 360.260.2469
email: sales@usdigital.com
l
website: www.usdigital.com
11100 ne 34th circle
l
vancouver, washington 98682 USA
USB-HUB
7-port Universal Serial Bus Hub
US
Digital
C o r p o r a t i o n
TM
Ordering Information:
Technical Data, Rev. 05.16.02, May 2002
All information subject to change without notice.
This device is a medium-speed and stand-alone USB-HUB that supports seven downstream ports and
one upstream port.
This USB-HUB with its 12 Mbps bus bandwidth connects low and medium speed PC desktop peripherals
with plug and play ease. It provides a more user-friendly interface for both computer and telephone
integration.
This USB-HUB is an excellent complementary serial interface. It offers simple, flexible, and highly
scaleable connectivity between a PC and a full range of peripherals.
This USB-HUB topology supports up to 127 devices in a tiered-star connection, with each device having
the maximum of 16 endpoints. Devices can be low speed (1.5 Mbps) or full speed (12Mbps).
The USB-HUB makes it easier than ever before to connect devices to a PC. There is no reason to open
the PC, and no add-in cards, DIP switch settings or IRQs to change. USB is also hot pluggable, so
shutting down or restarting the PC is not needed. The PC automatically detects the peripheral and
Description:
Price:
$40 / 1
$38 / 10
Includes:
Power adapter
6 ft. type A to type B cable
2 mounting magnets, screws
USB-HUB
Part #:
USB Connector Type A (downstream end):
USB Connector Type B (upstream end):
Mechanical Notes:
Dimension
Case
Length
4.06 in.
Width
2.44 in.
Thickness
1.06 in.
IBM - Compatible PC
MS Windows OSR 2.1B above or Windows 98 / SE, Windows 2000
Available USB port
System Requirements:
configures the necessary software. USB uses a smaller type of connector
therefore reducing the clutter of cables on the back of the PC due to bulky
serial and parallel connectors.
The USB1 is a data acquisition device designed to track up to 4 incremental
encoders and 8 digital inputs. The USB1 is available in single-ended or
differential versions and is compatible with most Windows operating sys-
tems and PCs. Please see the USB1 data sheet for more information.
USB 1.1 specification compatibility
Connect up to 127 USB devices by cascading multiple hubs
Supports both OHCI and UHCI
Supports self-power mode, use switching power
Includes one upstream and seven downstream ports
One LED indicator for power mode
Seven LEDS indicators for downstream port status
Plus and play
Over-current detection and protection, LED Status Indicators
Stackable one by one, cover changeable
Features:
Compatible Cables & Connectors:
USB:
CA-3849-3FT
3' USB cable A to B male connectors
CA-3849-6FT
6' USB cable A to B male connectors
CA-3849-10FT
10' USB cable A to B male connectors
Note: See Cables & Connectors data sheet for more information.
PDF 
ZIP