VISHAY
BAR64V-05
Document Number 85695
Rev. 1.2, 26-Apr-04
Vishay Semiconductors
www.vishay.com
1
18257
1
2
3
1
2
3
RF PIN Diodes - Dual, Common Cathode in SOT-23
Description
Characterized by low reverse Capacitance the PIN
Diodes BAR64V-05 was designed for RF signal
switching and tuning. As a function of the forward
bias current the forward resistance (rf) can be
adjusted over a wide range. A long carrier life time
offers low signal distortion for signals over 10 MHz up
to 3 GHz. Typical applications for this PIN Diodes are
switches and attenuators in wireless, mobile and TV-
systems.
Features
High reverse Voltage
Small reverse capacitance
High breakdown voltage
Applications
For frequency up to 3 GHz
RF-signal tuning
Signal attenuator and switches
Mobile , wireless and TV-Applications
Mechanical Data
Case: Plastic case (SOT-23)
Weight: approx. 8.1 mg
Packaging Codes/Options:
GS18 / 10 k per 13" reel (8 mm tape), 10 k/box
GS08 / 3 k per 7" reel (8 mm tape), 15 k/box
Parts Table
Absolute Maximum Ratings
T
amb
= 25 C, unless otherwise specified
Electrical Characteristics
T
amb
= 25 C, unless otherwise specified
Part
Ordering code
Marking
Remarks
BAR64V-05
BAR64V-05-GS18 or BAR64V-05-GS08
D5
Tape and Reel
Parameter
Test condition
Symbol
Value
Unit
Reverse voltage
V
R
100
V
Forward current
I
F
100
mA
Junction temperature
T
j
150
C
Storage temperature range
T
stg
- 55 to + 150
C
Parameter
Test condition
Symbol
Min
Typ.
Max
Unit
Reverse voltage
I
R
= 10
A
V
R
100
V
Reverse current
V
R
= 50 V
I
R
50
nA
Forward voltage
I
F
= 50 mA
V
F
1.1
V
www.vishay.com
4
Document Number 85695
Rev. 1.2, 26-Apr-04
VISHAY
BAR64V-05
Vishay Semiconductors
Ozone Depleting Substances Policy Statement
It is the policy of Vishay Semiconductor GmbH to
1. Meet all present and future national and international statutory requirements.
2. Regularly and continuously improve the performance of our products, processes, distribution and
operatingsystems with respect to their impact on the health and safety of our employees and the public, as
well as their impact on the environment.
It is particular concern to control or eliminate releases of those substances into the atmosphere which are
known as ozone depleting substances (ODSs).
The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs
and forbid their use within the next ten years. Various national and international initiatives are pressing for an
earlier ban on these substances.
Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the
use of ODSs listed in the following documents.
1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments
respectively
2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental
Protection Agency (EPA) in the USA
3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively.
Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting
substances and do not contain such substances.
We reserve the right to make changes to improve technical design
and may do so without further notice.
Parameters can vary in different applications. All operating parameters must be validated for each
customer application by the customer. Should the buyer use Vishay Semiconductors products for any
unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all
claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal
damage, injury or death associated with such unintended or unauthorized use.
Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany
Telephone: 49 (0)7131 67 2831, Fax number: 49 (0)7131 67 2423
PDF 
ZIP
