GENERAL DATA
Life Expectancy
Minimum operations
Mechanical
1 x 10
7
Electrical
1 x 10
5
at 15 A 220 VAC Res.
Operate Time (typical)
15 ms at nominal coil voltage
Release Time (typical)
10 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength
2000 Vrms coil to contact
(at sea level for 1 min.) 500 Vrms between open contacts
Insulation Resistance
1000 megohms min. at 500 VDC, 20C
50% RH
Dropout
Greater than 10% of nominal coil voltage
Ambient Temperature
At nominal coil voltage
Operating
-40C (-40F) to 70C (158F)
Storage
-40C (-40F) to 130C (266F)
Vibration
0.062" DA at 1055 Hz
Shock
Operating
20 g, 11 ms
1
/
2
sine (no false operation)
Non-operating 100 g, 11 ms
1
/
2
sine (no damage)
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy
Quick-connect
Note: Allow suitable slack on leads when wiring,
and do not subject the terminals to excessive
force.
Max. Solder Temp.
270C (518F)
Max. Solder Time
5 seconds
Weight
40 grams
COIL
Power
At Pickup Voltage
441 mW
(typical)
Max. Continuous
1.65 W at 20C (68F) ambient
Dissipation
1.35 W at 40C (104F) ambient
Temperature Rise
60C (108F) at nominal coil voltage
Temperature
Max. 130C (266F) Class B
CONTACTS
Arrangement
SPST (1 Form A)
SPDT (1 Form C)
Ratings
Resistive load:
Max. switched power: 450 W or 3300 VA
Max. switched current: 20 A
Max. switched voltage: 150* VDC or 400 VAC
* If switching voltage is greater than 30 VDC, special
precautions must be taken. Please contact the factory.
UL, CUR
NO: 15 A at 220 VAC (100 k operations)
NC: 10 A at 220 VAC (100 k operations)
Material
Silver cadmium oxide
Resistance
< 50 milliohms initially
(24 V, 1 A voltage drop method)
AZ2300
2/7/03W
20 AMP MINIATURE
POWER RELAY
FEATURES
Low cost
20 Amp switching
55 Amp inrush current
Class B insulation system
Quick-connect terminals
UL, CUR file E44211
NOTES
1. All values at 20C (68F).
2. Relay may pull in with less than "Must Operate" value.
3. Specifications subject to change without notice.
PDF 
ZIP