AZ734
7/12/01W
CONTACTS
Arrangement
DPST (2 Form A)
Ratings
Resistive load:
Max. switched power: 150 W or 1200 VA
Max. switched current: 5 A
Max. switched voltage: 150* VDC or 380 VAC
*Note: If switching voltage is greater than 30 VDC, special
precautions must be taken. Please contact the factory.
Rated Load
UL, CUR
5 A at
250 VAC general use, 100k cycles
5 A at 30 VDC resistive, 100k cycles
TV-3 at 125 VAC
Material
Silver cadmium oxide, silver tin oxide
Resistance
< 50 milliohms initially
(24 V, 1 A voltage drop method)
DPST MINIATURE
POWER RELAY
FEATURES
Dielectric strength 4000 Vrms
Low cost
Epoxy sealed version available
5 Amp switching -- double pole contacts
UL Class B insulation system
UL, CUR file E43203
GENERAL DATA
Life Expectancy
Minimum operations
Mechanical
1 x 10
7
Electrical
1 x 10
5
at 5 A 240 VAC Res.
Operate Time (typical)
15 ms at nominal coil voltage
Release Time (typical)
10 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength
4000 Vrms contact to coil
(at sea level for 1 min.) 1000 Vrms between open contacts
1000 Vrms between contact sets
Insulation
1000 megohms min. at 20C, 500 VDC,
Resistance
50% RH
Dropout
Greater than 10% of nominal coil voltage
Ambient Temperature
Operating
-40C (-40F) to 85C (185F)
Storage
-40C (-40F) to 130C (266F)
Vibration
0.062" DA at 1055 Hz
Shock
20 g
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy, P.C.
Max. Solder Temp.
270C (518F)
Max. Solder Time
5 seconds
Max. Solvent Temp.
80C (176F)
Max. Immersion Time
30 seconds
Weight
13 grams
COIL
Power
At Pickup Voltage
300 mW
(typical)
Max. Continuous
Dissipation
1.5 W at 20C (68F) ambient
Temperature Rise
45C (81F) at nominal coil voltage
Temperature
Max. 130C (266F)
NOTES
1. All values at 20C (68F).
2. Relay may pull in with less than "Must Operate" value.
3. Specifications subject to change without notice.
PDF 
ZIP