GENERAL DATA
Life Expectancy
Minimum operations
Mechanical
1 x 10
7
Electrical
1 x 10
5
at 5 A 240 VAC Res.
Operate Time (typical)
8 ms at nominal coil voltage
Release Time (typical)
4 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength
5000 Vrms coil to contact
(at sea level for 1 min.) 1000 Vrms between open contacts
Surge Voltage
Coil to contact
10,000V (at 1.2x50 s)
Insulation
1000 megohms min. at 20C
Resistance
500 VDC 50% RH
Dropout
Greater than 5% of nominal coil voltage
Ambient Temperature
At nominal coil voltage
Operating
-40C (-40F) to 90C (194F), standard
-40C (-40F) to 105C (221F), sensitive
Storage
-40C (-40F) to 130C (266F)
Vibration
0.062" DA at 1050 Hz
Shock
10 g operating, 100 g damage
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy, P. C.
Max. Solder Temp.
270C (518F)
Max. Solder Time
5 seconds
Max. Solvent Temp.
80C (176F)
Max. Immersion Time
30 seconds
Weight
4.6 grams
AZ770
8/11/03W
CONTACTS
Arrangement
SPST (1 Form A)
SPDT (1 Form C)
Ratings
Resistive load:
Max. switched power: 150 W (SPST-NO) standard
1250 VA (SPST-NO) standard
90 W (SPDT)
750 VA (SPDT)
Max. switched current: 5 A AC SPST-NO standard
5 A DC SPST-NO standard
3 A AC/DC SPST-NO sensitive
3 A AC/DC SPDT
Max. switched voltage: 150* VDC or 380 VAC
*
Note: If switching voltage is greater than 30 VDC, special
precautions must be taken. Please contact the factory.
Rated Load
Form A (N.O.)
UL, CUR
5 A at 250 VAC, Res., 100k cycles
5 A at 30 VDC, Res., 100k cycles
1/8 HP, 125 / 250 VAC, 100k cycles
3 A at 250 VAC, 0.4 PF., 100k cycles
C300 Pilot Duty, 125 / 250 VAC, 100k cycles
TV-2, 120 VAC
Form C
3 A at 250 VAC, Res. 100k cycles
3 A at 30 VDC, Res, 100k cycles
VDE
Form A and Form C
5 A at 250 VAC, 100k cycles
5 A at 30 VDC, 100k cycles
Material
Silver nickel, gold plating available
Resistance
<100 milliohms initially
(24 V, 1 A voltage drop method)
NOTES
1. All values at 20C (68F).
2. Relay may pull in with less than "Must Operate" value.
3. Specifications subject to change without notice.
COIL
Power
At Pickup Voltage
253 mW standard
(typical)
113 mW sensitive
Max. Continuous
1.25 W at 20C (68F) ambient
Dissipation
Temperature Rise
41C (74F) at nominal coil voltage, standard
22C (40F) at nominal coil voltage, sensitive
Temperature
Max. 130C (266F)
SPDT SUBMINIATURE
POWER RELAY
FEATURES
Small footprint
5 kV dielectric strength, 10 kV surge
Class B insulation standard
8 mm creepage and clearance
Epoxy sealed version available
5 Amp switching
UL, CUR file E44211, VDE 40006815
PDF 
ZIP