MAX1043 - 10-Bit, Multichannel ADCs/DACs with FIFO, Temperature Sensing, and GPIO PortsThe MAX1021/MAX1043 integrateA multichannel, 10-bit, analog-to-digital converter (ADC) andA 10-bit, digital-to-analog converter (DAC) inA single IC. The devices also includeA temperature sensor and configurable general-purpose I/O ports (GPIOs) withA 25MHz SPI™-/QSPI™-/MICROWIRE™-compatible serial interface. The ADC is available in an eight input-channel version. The DAC outputs settle within 2.0µs, and the ADC hasA 225ksps c
MAX1090 - 400ksps, +5v, 8-/4-channel, 10-bit Adcs With +2.5v Reference and Parallel Interface
MAX1090ACEI - 400ksps, +5V, 8-/4-Channel, 10-Bit ADCs with +2.5V Reference and Parallel Interface
MAX1090AEEI - 400ksps, +5V, 8-/4-Channel, 10-Bit ADCs with +2.5V Reference and Parallel Interface
MAX1090BCEI - 400ksps, +5V, 8-/4-Channel, 10-Bit ADCs with +2.5V Reference and Parallel Interface
MAX1090BEEI - 400ksps, +5V, 8-/4-Channel, 10-Bit ADCs with +2.5V Reference and Parallel Interface
MAX1091 - 250ksps, +3v, 8-/4-channel, 10-bit Adcs With +2.5v Reference and Parallel Interface
MAX1091ACEI - 250ksps, +3V, 8-/4-Channel, 10-Bit ADCs with +2.5V Reference and Parallel Interface
MAX1091AEEI - 250ksps, +3V, 8-/4-Channel, 10-Bit ADCs with +2.5V Reference and Parallel Interface
MAX1091BCEI - 250ksps, +3V, 8-/4-Channel, 10-Bit ADCs with +2.5V Reference and Parallel Interface
MAX1091BEEI - 250ksps, +3V, 8-/4-Channel, 10-Bit ADCs with +2.5V Reference and Parallel Interface
MAX1092 - 400ksps, +5V, 8/4-Channel, 10-Bit ADCs With +2.5V Reference and Parallel Interface
MAX1092ACEG - 400ksps, +5V, 8-/4-Channel, 10-Bit ADCs with +2.5V Reference and Parallel Interface
MAX1092AEEG - 400ksps, +5V, 8-/4-Channel, 10-Bit ADCs with +2.5V Reference and Parallel Interface
MAX1092BCEG - 400ksps, +5V, 8-/4-Channel, 10-Bit ADCs with +2.5V Reference and Parallel Interface
MAX1092BEEG - 400ksps, +5V, 8-/4-Channel, 10-Bit ADCs with +2.5V Reference and Parallel Interface
MAX1093 - 250ksps, +3V, 8/4-Channel, 10-Bit ADCs With +2.5V Reference and Parallel Interface
MAX1093ACEG - 250ksps, +3V, 8-/4-Channel, 10-Bit ADCs with +2.5V Reference and Parallel Interface
MAX1093AEEG - 250ksps, +3V, 8-/4-Channel, 10-Bit ADCs with +2.5V Reference and Parallel Interface
MAX1093BCEG - 250ksps, +3V, 8-/4-Channel, 10-Bit ADCs with +2.5V Reference and Parallel Interface
MAX1093BEEG - 250ksps, +3V, 8-/4-Channel, 10-Bit ADCs with +2.5V Reference and Parallel Interface
MAX1098 - 10-bit Serial-output Temperature Sensors With 5-channel Adc
MAX1098AEAE - 10-Bit Serial-Output Temperature Sensors with 5-Channel ADC
MAX1098BEAE - 10-Bit Serial-Output Temperature Sensors with 5-Channel ADC
MAX1098CEAE - 10-Bit Serial-Output Temperature Sensors with 5-Channel ADC
MAX1098-MAX1099 - 10-Bit Serial-Output Temperature Sensors with 5-Channel ADC
MAX1099 - 10-Bit Serial-Output Temperature Sensors with 5-Channel ADC
MAX1099AEAE - 10-Bit Serial-Output Temperature Sensors with 5-Channel ADC
MAX1099BEAE - 10-Bit Serial-Output Temperature Sensors with 5-Channel ADC
MAX1099CEAE - 10-Bit Serial-Output Temperature Sensors with 5-Channel ADC
MAX110 - Low-cost, 2-channel, Ўѕ14-bit Serial Adcs
MAX1101 - Single-chip, 8-bit Ccd Digitizer With Clamp and 6-bit Pga
MAX11014 - The MAX11014/MAX11015 set and control bias conditions for dual MESFET power devices found in point-to-point communication and other microwave base stations. The MAX11014 integrates complete dual analog closed-loop drain-current controllers for ClassA MESFET amplifier operation, while the MAX11015 targets Class AB operation. Both devices integrate SRAM lookup tables (LUTs) that can be used to store temperature and drain-current compensation data.Each device includes dual high-side current-sense amplifiers t
MAX11014BGTM - Automatic RF MESFET Amplifier Drain-Current Controllers The MAX11014/MAX11015 set and control bias conditions for dual MESFET power devices found in point-to-point communication and other microwave base stations. The MAX11014 integrates complete dual analog closed-loop drain-current controllers for ClassA MESFET amplifier operation while the MAX11015 targets Class AB operation. Both devices integrate SRAM lookup tables (LUTs) that can be used to store temperature and drain-current compensation data. Each d
MAX11015 - The MAX11014/MAX11015 set and control bias conditions for dual MESFET power devices found in point-to-point communication and other microwave base stations. The MAX11014 integrates complete dual analog closed-loop drain-current controllers for ClassA MESFET amplifier operation, while the MAX11015 targets Class AB operation. Both devices integrate SRAM lookup tables (LUTs) that can be used to store temperature and drain-current compensation data.Each device includes dual high-side current-sense amplifiers t
MAX11015BGTM - Automatic RF MESFET Amplifier Drain-Current Controllers The MAX11014/MAX11015 set and control bias conditions for dual MESFET power devices found in point-to-point communication and other microwave base stations. The MAX11014 integrates complete dual analog closed-loop drain-current controllers for ClassA MESFET amplifier operation while the MAX11015 targets Class AB operation. Both devices integrate SRAM lookup tables (LUTs) that can be used to store temperature and drain-current compensation data. Each d
MAX1101CWG - Single-Chip, 8-Bit CCD Digitizer with Clamp and 6-Bit PGA
MAX1101-FIG13 - Single-Chip, 8-Bit CCD Digitizer With Clamp and 6-Bit Pga
MAX11041 - Wired Remote Controllers The MAX11041/MAX11042 wired remote controllers convert up to six or 30 different pushbuttons into an I2C* register. Together with low-cost pushbutton switches and 1% resistors, the MAX11041/MAX11042 are total solutions overA single-wire interface.A wired remote controller easily piggybacks toA standard 3.5mm headphone jack usingA fourth contact or one of the audio signals. To conserve battery life, the MAX11041/MAX11042 consume only 5µA (typ) while reading keypresses in real tim
MAX11041EBC - Wired Remote Controllers The MAX11041/MAX11042 wired remote controllers convert up to six or 30 different pushbuttons into an I2C* register. Together with low-cost pushbutton switches and 1% resistors, the MAX11041/MAX11042 are total solutions overA single-wire interface.A wired remote controller easily piggybacks toA standard 3.5mm headphone jack usingA fourth contact or one of the audio signals. To conserve battery life, the MAX11041/MAX11042 consume only 5µA (typ) while reading keypresses in real tim
MAX11041ETC - Wired Remote Controllers The MAX11041/MAX11042 wired remote controllers convert up to six or 30 different pushbuttons into an I2C* register. Together with low-cost pushbutton switches and 1% resistors, the MAX11041/MAX11042 are total solutions overA single-wire interface.A wired remote controller easily piggybacks toA standard 3.5mm headphone jack usingA fourth contact or one of the audio signals. To conserve battery life, the MAX11041/MAX11042 consume only 5µA (typ) while reading keypresses in real tim
MAX11042 - Wired Remote Controllers The MAX11041/MAX11042 wired remote controllers convert up to six or 30 different pushbuttons into an I2C* register. Together with low-cost pushbutton switches and 1% resistors, the MAX11041/MAX11042 are total solutions overA single-wire interface.A wired remote controller easily piggybacks toA standard 3.5mm headphone jack usingA fourth contact or one of the audio signals. To conserve battery life, the MAX11041/MAX11042 consume only 5µA (typ) while reading keypresses in real tim
MAX11042EBC - Wired Remote Controllers The MAX11041/MAX11042 wired remote controllers convert up to six or 30 different pushbuttons into an I2C* register. Together with low-cost pushbutton switches and 1% resistors, the MAX11041/MAX11042 are total solutions overA single-wire interface.A wired remote controller easily piggybacks toA standard 3.5mm headphone jack usingA fourth contact or one of the audio signals. To conserve battery life, the MAX11041/MAX11042 consume only 5µA (typ) while reading keypresses in real tim
MAX11042ETC - Wired Remote Controllers The MAX11041/MAX11042 wired remote controllers convert up to six or 30 different pushbuttons into an I2C* register. Together with low-cost pushbutton switches and 1% resistors, the MAX11041/MAX11042 are total solutions overA single-wire interface.A wired remote controller easily piggybacks toA standard 3.5mm headphone jack usingA fourth contact or one of the audio signals. To conserve battery life, the MAX11041/MAX11042 consume only 5µA (typ) while reading keypresses in real tim
MAX111BC - Low-Cost, 2-Channel, 14-Bit Serial ADCs
MAX111BCAP - Low-Cost, 2-Channel, Ўѕ14-Bit Serial ADCs
MAX111BC/D - MAX110, MAX111 Low-Cost, 2-Channel, ±14-Bit Serial ADCs
MAX111BC/E - MAX110, MAX111 Low-Cost, 2-Channel, ±14-Bit Serial ADCs
MAX111BCPE - Low-Cost, 2-Channel, Ўѕ14-Bit Serial ADCs
MAX111BCWE - Low-Cost, 2-Channel, Ўѕ14-Bit Serial ADCs
MAX111BE - Low-Cost, 2-Channel, 14-Bit Serial ADCs
MAX111BEAP - Low-Cost, 2-Channel, Ўѕ14-Bit Serial ADCs
MAX111BEPE - Low-Cost, 2-Channel, Ўѕ14-Bit Serial ADCs
MAX111BEWE - Low-Cost, 2-Channel, Ўѕ14-Bit Serial ADCs
MAX111BM - MAX110, MAX111 Low-Cost, 2-Channel, ±14-Bit Serial ADCs
MAX111BMJE - Low-Cost, 2-Channel, Ўѕ14-Bit Serial ADCs
MAX1121 - 1.8v, 8-bit, 250msps Analog-to-digital Converter With Lvds Outputs For Wideband Applications
MAX1121 - 1.8v, 12-bit, 170msps Adc For Broadband Applications
MAX1121EGK - 1.8V, 8-Bit, 250Msps Analog-to-Digital Converter with LVDS Outputs for Wideband Applications
MAX1122 - 1.8V, 12-Bit, 170Msps ADC for Broadband Applications
MAX1122EGK - 1.8V, 10-Bit, 170Msps Analog-to-digital Converter With LVDS Outputs For Wideband Applications The MAX1122 isA Monolithic 10-bit, 170Msps Analog-to-digital Converter (ADC) Optimized For Outstanding Dynamic Performance at High if Frequencies up to 500MHz. The Product Operates With Conversion Rates of up to 170Msps While Consuming Only 460mW. FEATURES Applications 170Msps Conversion Rate SNR = 57.1dB/56.5dB at Fin = 100MHz/500MHz SFDR = 72dBc/63.5dBc at Fin = 100MHz/500MHz NPR = 53.7dB at Fnotch = 28.8MHz Sin
MAX1123 - 1.8V, 12-Bit, 170Msps ADC for Broadband Applications
MAX1123 - 1.8v, 10-bit, 210msps Analog-to-digital Converter With Lvds Outputs For Wideband Applications
MAX1123EGK - 1.8V, 10-Bit, 210Msps Analog-to-Digital Converter with LVDS Outputs for Wideband Applications
MAX1124 - 1.8V, 12-Bit, 170Msps ADC for Broadband Applications
MAX1124 - 1.8v, 10-bit, 250msps Analog-to-digital Converter With Lvds Outputs For Wideband Applications
MAX1124EGK - 1.8V, 10-Bit, 250Msps Analog-to-Digital Converter with LVDS Outputs for Wideband Applications