MC56F8355 - 16-bit Hybrid Controller.up to 60 Mips at 60MHz Core Frequency DSP and MCU Functionality inA Unified,c-efficient Architecture 256KB Program Flash 4KB Program RAM 8KB Data Flash 16KB Data RAM 16KB Boot Flash Two 6-channel PWM Modules Four 4-channel, 12-bit ADCs Temperature Sensor
MCP100 - Microcontroller Supervisory Circuit With Push-pull Output
MCP101 - Microcontroller Supervisory Circuit with Push-Pull Output
MCP102 - Micropower Voltage SupervisorsThe MCP102/103/121/131 are voltage supervisordevices designed to keepA microcontroller in resetuntil the system voltage has reached and stabilized atthe proper level for reliable system operation. The tablebelow shows the available features for these devices.Features• Ultra low supply current: 1.75 µA (steady state max.)• Precision monitoring options of:- 1.90V, 2.32V, 2.63V, 2.93V, 3.08V, 4.38Vand 4.63V• Resets microcontroller inA power-loss event• RST pin (Active-low):- MCP
MCP102T-195I/LB - Micropower Voltage SupervisorsThe MCP102/103/121/131 are voltage supervisordevices designed to keepA microcontroller in resetuntil the system voltage has reached and stabilized atthe proper level for reliable system operation. The tablebelow shows the available features for these devices.Features• Ultra low supply current: 1.75 µA (steady state max.)• Precision monitoring options of:- 1.90V, 2.32V, 2.63V, 2.93V, 3.08V, 4.38Vand 4.63V• Resets microcontroller inA power-loss event• RST pin (Active-low):- MCP
MCP102T-195I/TT - Micropower Voltage SupervisorsThe MCP102/103/121/131 are voltage supervisordevices designed to keepA microcontroller in resetuntil the system voltage has reached and stabilized atthe proper level for reliable system operation. The tablebelow shows the available features for these devices.Features• Ultra low supply current: 1.75 µA (steady state max.)• Precision monitoring options of:- 1.90V, 2.32V, 2.63V, 2.93V, 3.08V, 4.38Vand 4.63V• Resets microcontroller inA power-loss event• RST pin (Active-low):- MCP
MCP102T-240E/LB - Micropower Voltage SupervisorsThe MCP102/103/121/131 are voltage supervisordevices designed to keepA microcontroller in resetuntil the system voltage has reached and stabilized atthe proper level for reliable system operation. The tablebelow shows the available features for these devices.Features• Ultra low supply current: 1.75 µA (steady state max.)• Precision monitoring options of:- 1.90V, 2.32V, 2.63V, 2.93V, 3.08V, 4.38Vand 4.63V• Resets microcontroller inA power-loss event• RST pin (Active-low):- MCP
MCP102T-240ETT - Micropower Voltage SupervisorsThe MCP102/103/121/131 are voltage supervisordevices designed to keepA microcontroller in resetuntil the system voltage has reached and stabilized atthe proper level for reliable system operation. The tablebelow shows the available features for these devices.Features• Ultra low supply current: 1.75 µA (steady state max.)• Precision monitoring options of:- 1.90V, 2.32V, 2.63V, 2.93V, 3.08V, 4.38Vand 4.63V• Resets microcontroller inA power-loss event• RST pin (Active-low):- MCP
MCP102T-270E/LB - Micropower Voltage SupervisorsThe MCP102/103/121/131 are voltage supervisordevices designed to keepA microcontroller in resetuntil the system voltage has reached and stabilized atthe proper level for reliable system operation. The tablebelow shows the available features for these devices.Features• Ultra low supply current: 1.75 µA (steady state max.)• Precision monitoring options of:- 1.90V, 2.32V, 2.63V, 2.93V, 3.08V, 4.38Vand 4.63V• Resets microcontroller inA power-loss event• RST pin (Active-low):- MCP
MCP102T-270E/TT - Micropower Voltage SupervisorsThe MCP102/103/121/131 are voltage supervisordevices designed to keepA microcontroller in resetuntil the system voltage has reached and stabilized atthe proper level for reliable system operation. The tablebelow shows the available features for these devices.Features• Ultra low supply current: 1.75 µA (steady state max.)• Precision monitoring options of:- 1.90V, 2.32V, 2.63V, 2.93V, 3.08V, 4.38Vand 4.63V• Resets microcontroller inA power-loss event• RST pin (Active-low):- MCP
MCP102T-300E/LB - Micropower Voltage SupervisorsThe MCP102/103/121/131 are voltage supervisordevices designed to keepA microcontroller in resetuntil the system voltage has reached and stabilized atthe proper level for reliable system operation. The tablebelow shows the available features for these devices.Features• Ultra low supply current: 1.75 µA (steady state max.)• Precision monitoring options of:- 1.90V, 2.32V, 2.63V, 2.93V, 3.08V, 4.38Vand 4.63V• Resets microcontroller inA power-loss event• RST pin (Active-low):- MCP
MCP102T-300E/TT - Micropower Voltage SupervisorsThe MCP102/103/121/131 are voltage supervisordevices designed to keepA microcontroller in resetuntil the system voltage has reached and stabilized atthe proper level for reliable system operation. The tablebelow shows the available features for these devices.Features• Ultra low supply current: 1.75 µA (steady state max.)• Precision monitoring options of:- 1.90V, 2.32V, 2.63V, 2.93V, 3.08V, 4.38Vand 4.63V• Resets microcontroller inA power-loss event• RST pin (Active-low):- MCP
MCP102T-315E/LB - Micropower Voltage SupervisorsThe MCP102/103/121/131 are voltage supervisordevices designed to keepA microcontroller in resetuntil the system voltage has reached and stabilized atthe proper level for reliable system operation. The tablebelow shows the available features for these devices.Features• Ultra low supply current: 1.75 µA (steady state max.)• Precision monitoring options of:- 1.90V, 2.32V, 2.63V, 2.93V, 3.08V, 4.38Vand 4.63V• Resets microcontroller inA power-loss event• RST pin (Active-low):- MCP
MCP102T-315E/TT - Micropower Voltage SupervisorsThe MCP102/103/121/131 are voltage supervisordevices designed to keepA microcontroller in resetuntil the system voltage has reached and stabilized atthe proper level for reliable system operation. The tablebelow shows the available features for these devices.Features• Ultra low supply current: 1.75 µA (steady state max.)• Precision monitoring options of:- 1.90V, 2.32V, 2.63V, 2.93V, 3.08V, 4.38Vand 4.63V• Resets microcontroller inA power-loss event• RST pin (Active-low):- MCP
MCP102T-450E/LB - Micropower Voltage SupervisorsThe MCP102/103/121/131 are voltage supervisordevices designed to keepA microcontroller in resetuntil the system voltage has reached and stabilized atthe proper level for reliable system operation. The tablebelow shows the available features for these devices.Features• Ultra low supply current: 1.75 µA (steady state max.)• Precision monitoring options of:- 1.90V, 2.32V, 2.63V, 2.93V, 3.08V, 4.38Vand 4.63V• Resets microcontroller inA power-loss event• RST pin (Active-low):- MCP
MCP102T-450E/TT - Micropower Voltage SupervisorsThe MCP102/103/121/131 are voltage supervisordevices designed to keepA microcontroller in resetuntil the system voltage has reached and stabilized atthe proper level for reliable system operation. The tablebelow shows the available features for these devices.Features• Ultra low supply current: 1.75 µA (steady state max.)• Precision monitoring options of:- 1.90V, 2.32V, 2.63V, 2.93V, 3.08V, 4.38Vand 4.63V• Resets microcontroller inA power-loss event• RST pin (Active-low):- MCP
MCP102T-475E/LB - Micropower Voltage SupervisorsThe MCP102/103/121/131 are voltage supervisordevices designed to keepA microcontroller in resetuntil the system voltage has reached and stabilized atthe proper level for reliable system operation. The tablebelow shows the available features for these devices.Features• Ultra low supply current: 1.75 µA (steady state max.)• Precision monitoring options of:- 1.90V, 2.32V, 2.63V, 2.93V, 3.08V, 4.38Vand 4.63V• Resets microcontroller inA power-loss event• RST pin (Active-low):- MCP
MCP102T-475E/TT - Micropower Voltage SupervisorsThe MCP102/103/121/131 are voltage supervisordevices designed to keepA microcontroller in resetuntil the system voltage has reached and stabilized atthe proper level for reliable system operation. The tablebelow shows the available features for these devices.Features• Ultra low supply current: 1.75 µA (steady state max.)• Precision monitoring options of:- 1.90V, 2.32V, 2.63V, 2.93V, 3.08V, 4.38Vand 4.63V• Resets microcontroller inA power-loss event• RST pin (Active-low):- MCP
MCP103 - Micropower Voltage SupervisorsThe MCP102/103/121/131 are voltage supervisordevices designed to keepA microcontroller in resetuntil the system voltage has reached and stabilized atthe proper level for reliable system operation. The tablebelow shows the available features for these devices.Features• Ultra low supply current: 1.75 µA (steady state max.)• Precision monitoring options of:- 1.90V, 2.32V, 2.63V, 2.93V, 3.08V, 4.38Vand 4.63V• Resets microcontroller inA power-loss event• RST pin (Active-low):- MCP
MCP103T-195I/LB - Micropower Voltage SupervisorsThe MCP102/103/121/131 are voltage supervisordevices designed to keepA microcontroller in resetuntil the system voltage has reached and stabilized atthe proper level for reliable system operation. The tablebelow shows the available features for these devices.Features• Ultra low supply current: 1.75 µA (steady state max.)• Precision monitoring options of:- 1.90V, 2.32V, 2.63V, 2.93V, 3.08V, 4.38Vand 4.63V• Resets microcontroller inA power-loss event• RST pin (Active-low):- MCP
MCP103T-195I/TT - Micropower Voltage SupervisorsThe MCP102/103/121/131 are voltage supervisordevices designed to keepA microcontroller in resetuntil the system voltage has reached and stabilized atthe proper level for reliable system operation. The tablebelow shows the available features for these devices.Features• Ultra low supply current: 1.75 µA (steady state max.)• Precision monitoring options of:- 1.90V, 2.32V, 2.63V, 2.93V, 3.08V, 4.38Vand 4.63V• Resets microcontroller inA power-loss event• RST pin (Active-low):- MCP
MCP103T-240E/LB - Micropower Voltage SupervisorsThe MCP102/103/121/131 are voltage supervisordevices designed to keepA microcontroller in resetuntil the system voltage has reached and stabilized atthe proper level for reliable system operation. The tablebelow shows the available features for these devices.Features• Ultra low supply current: 1.75 µA (steady state max.)• Precision monitoring options of:- 1.90V, 2.32V, 2.63V, 2.93V, 3.08V, 4.38Vand 4.63V• Resets microcontroller inA power-loss event• RST pin (Active-low):- MCP
MCP103T-240ETT - Micropower Voltage SupervisorsThe MCP102/103/121/131 are voltage supervisordevices designed to keepA microcontroller in resetuntil the system voltage has reached and stabilized atthe proper level for reliable system operation. The tablebelow shows the available features for these devices.Features• Ultra low supply current: 1.75 µA (steady state max.)• Precision monitoring options of:- 1.90V, 2.32V, 2.63V, 2.93V, 3.08V, 4.38Vand 4.63V• Resets microcontroller inA power-loss event• RST pin (Active-low):- MCP
MCP103T-270E/LB - Micropower Voltage SupervisorsThe MCP102/103/121/131 are voltage supervisordevices designed to keepA microcontroller in resetuntil the system voltage has reached and stabilized atthe proper level for reliable system operation. The tablebelow shows the available features for these devices.Features• Ultra low supply current: 1.75 µA (steady state max.)• Precision monitoring options of:- 1.90V, 2.32V, 2.63V, 2.93V, 3.08V, 4.38Vand 4.63V• Resets microcontroller inA power-loss event• RST pin (Active-low):- MCP
MCP103T-270E/TT - Micropower Voltage SupervisorsThe MCP102/103/121/131 are voltage supervisordevices designed to keepA microcontroller in resetuntil the system voltage has reached and stabilized atthe proper level for reliable system operation. The tablebelow shows the available features for these devices.Features• Ultra low supply current: 1.75 µA (steady state max.)• Precision monitoring options of:- 1.90V, 2.32V, 2.63V, 2.93V, 3.08V, 4.38Vand 4.63V• Resets microcontroller inA power-loss event• RST pin (Active-low):- MCP
MCP103T-300E/LB - Micropower Voltage SupervisorsThe MCP102/103/121/131 are voltage supervisordevices designed to keepA microcontroller in resetuntil the system voltage has reached and stabilized atthe proper level for reliable system operation. The tablebelow shows the available features for these devices.Features• Ultra low supply current: 1.75 µA (steady state max.)• Precision monitoring options of:- 1.90V, 2.32V, 2.63V, 2.93V, 3.08V, 4.38Vand 4.63V• Resets microcontroller inA power-loss event• RST pin (Active-low):- MCP
MCP103T-300E/TT - Micropower Voltage SupervisorsThe MCP102/103/121/131 are voltage supervisordevices designed to keepA microcontroller in resetuntil the system voltage has reached and stabilized atthe proper level for reliable system operation. The tablebelow shows the available features for these devices.Features• Ultra low supply current: 1.75 µA (steady state max.)• Precision monitoring options of:- 1.90V, 2.32V, 2.63V, 2.93V, 3.08V, 4.38Vand 4.63V• Resets microcontroller inA power-loss event• RST pin (Active-low):- MCP
MCP103T-315E/LB - Micropower Voltage SupervisorsThe MCP102/103/121/131 are voltage supervisordevices designed to keepA microcontroller in resetuntil the system voltage has reached and stabilized atthe proper level for reliable system operation. The tablebelow shows the available features for these devices.Features• Ultra low supply current: 1.75 µA (steady state max.)• Precision monitoring options of:- 1.90V, 2.32V, 2.63V, 2.93V, 3.08V, 4.38Vand 4.63V• Resets microcontroller inA power-loss event• RST pin (Active-low):- MCP
MCP103T-315E/TT - Micropower Voltage SupervisorsThe MCP102/103/121/131 are voltage supervisordevices designed to keepA microcontroller in resetuntil the system voltage has reached and stabilized atthe proper level for reliable system operation. The tablebelow shows the available features for these devices.Features• Ultra low supply current: 1.75 µA (steady state max.)• Precision monitoring options of:- 1.90V, 2.32V, 2.63V, 2.93V, 3.08V, 4.38Vand 4.63V• Resets microcontroller inA power-loss event• RST pin (Active-low):- MCP
MCP103T-450E/LB - Micropower Voltage SupervisorsThe MCP102/103/121/131 are voltage supervisordevices designed to keepA microcontroller in resetuntil the system voltage has reached and stabilized atthe proper level for reliable system operation. The tablebelow shows the available features for these devices.Features• Ultra low supply current: 1.75 µA (steady state max.)• Precision monitoring options of:- 1.90V, 2.32V, 2.63V, 2.93V, 3.08V, 4.38Vand 4.63V• Resets microcontroller inA power-loss event• RST pin (Active-low):- MCP
MCP103T-450E/TT - Micropower Voltage SupervisorsThe MCP102/103/121/131 are voltage supervisordevices designed to keepA microcontroller in resetuntil the system voltage has reached and stabilized atthe proper level for reliable system operation. The tablebelow shows the available features for these devices.Features• Ultra low supply current: 1.75 µA (steady state max.)• Precision monitoring options of:- 1.90V, 2.32V, 2.63V, 2.93V, 3.08V, 4.38Vand 4.63V• Resets microcontroller inA power-loss event• RST pin (Active-low):- MCP
MCP103T-475E/LB - Micropower Voltage SupervisorsThe MCP102/103/121/131 are voltage supervisordevices designed to keepA microcontroller in resetuntil the system voltage has reached and stabilized atthe proper level for reliable system operation. The tablebelow shows the available features for these devices.Features• Ultra low supply current: 1.75 µA (steady state max.)• Precision monitoring options of:- 1.90V, 2.32V, 2.63V, 2.93V, 3.08V, 4.38Vand 4.63V• Resets microcontroller inA power-loss event• RST pin (Active-low):- MCP
MCP103T-475E/TT - Micropower Voltage SupervisorsThe MCP102/103/121/131 are voltage supervisordevices designed to keepA microcontroller in resetuntil the system voltage has reached and stabilized atthe proper level for reliable system operation. The tablebelow shows the available features for these devices.Features• Ultra low supply current: 1.75 µA (steady state max.)• Precision monitoring options of:- 1.90V, 2.32V, 2.63V, 2.93V, 3.08V, 4.38Vand 4.63V• Resets microcontroller inA power-loss event• RST pin (Active-low):- MCP
MCP120 - Microcontroller Supervisory Circuit With Open Drain Output
MCP120-270DI - Microcontroller Supervisory Circuit with Open Drain Output
MCP120-270FI - Microcontroller Supervisory Circuit with Open Drain Output
MCP120-270GI - Microcontroller Supervisory Circuit with Open Drain Output
MCP120-270HI - Microcontroller Supervisory Circuit with Open Drain Output
MCP120-300DI - Microcontroller Supervisory Circuit with Open Drain Output
MCP120-300FI - Microcontroller Supervisory Circuit with Open Drain Output
MCP120-300GI - Microcontroller Supervisory Circuit with Open Drain Output
MCP120-300HI - Microcontroller Supervisory Circuit with Open Drain Output
MCP120-315DI - Microcontroller Supervisory Circuit with Open Drain Output
MCP120-315FI - Microcontroller Supervisory Circuit with Open Drain Output
MCP120-315GI - Microcontroller Supervisory Circuit with Open Drain Output
MCP120-315HI - Microcontroller Supervisory Circuit with Open Drain Output
MCP120-450DI - Microcontroller Supervisory Circuit with Open Drain Output
MCP120-450FI - Microcontroller Supervisory Circuit with Open Drain Output
MCP120-450GI - Microcontroller Supervisory Circuit with Open Drain Output
MCP120-450HI - Microcontroller Supervisory Circuit with Open Drain Output
MCP120-460DI - Microcontroller Supervisory Circuit with Open Drain Output
MCP120-460FI - Microcontroller Supervisory Circuit with Open Drain Output
MCP120-460GI - Microcontroller Supervisory Circuit with Open Drain Output
MCP120-460HI - Microcontroller Supervisory Circuit with Open Drain Output
MCP120-475DI - Microcontroller Supervisory Circuit with Open Drain Output
MCP120-475FI - Microcontroller Supervisory Circuit with Open Drain Output
MCP120-475GI - Microcontroller Supervisory Circuit with Open Drain Output
MCP120-475HI - Microcontroller Supervisory Circuit with Open Drain Output
MCP120-485DI - Microcontroller Supervisory Circuit with Open Drain Output
MCP120-485FI - Microcontroller Supervisory Circuit with Open Drain Output
MCP120-485GI - Microcontroller Supervisory Circuit with Open Drain Output
MCP120-485HI - Microcontroller Supervisory Circuit with Open Drain Output
MCP120T - Microcontroller Supervisory Circuit with Open Drain Output
MCP120T-270DI - Microcontroller Supervisory Circuit with Open Drain Output
MCP120T-270FI - Microcontroller Supervisory Circuit with Open Drain Output
MCP120T-270GI - Microcontroller Supervisory Circuit with Open Drain Output
MCP120T-270HI - Microcontroller Supervisory Circuit with Open Drain Output
MCP120T-270I/TT - The MCP120 isA Voltage Supervisory Device Designed to KeepA Microcontroller in Reset Until The System Voltage Has Reached The Proper Level and Stabilized
MCP120T-300DI - Microcontroller Supervisory Circuit with Open Drain Output
MCP120T-300FI - Microcontroller Supervisory Circuit with Open Drain Output
MCP120T-300GI - Microcontroller Supervisory Circuit with Open Drain Output
MCP120T-300HI - Microcontroller Supervisory Circuit with Open Drain Output
MCP120T-300I/TT - The MCP120 isA Voltage Supervisory Device Designed to KeepA Microcontroller in Reset Until The System Voltage Has Reached The Proper Level and Stabilized
MCP120T-315DI - Microcontroller Supervisory Circuit with Open Drain Output
MCP120T-315FI - Microcontroller Supervisory Circuit with Open Drain Output
MCP120T-315GI - Microcontroller Supervisory Circuit with Open Drain Output
MCP120T-315HI - Microcontroller Supervisory Circuit with Open Drain Output
MCP120T-315I/TT - The MCP120 isA Voltage Supervisory Device Designed to KeepA Microcontroller in Reset Until The System Voltage Has Reached The Proper Level and Stabilized
MCP120T-450DI - Microcontroller Supervisory Circuit with Open Drain Output
MCP120T-450FI - Microcontroller Supervisory Circuit with Open Drain Output
MCP120T-450GI - Microcontroller Supervisory Circuit with Open Drain Output
MCP120T-450HI - Microcontroller Supervisory Circuit with Open Drain Output
MCP120T-450I/TT - The MCP120 isA Voltage Supervisory Device Designed to KeepA Microcontroller in Reset Until The System Voltage Has Reached The Proper Level and Stabilized
MCP120T-460DI - Microcontroller Supervisory Circuit with Open Drain Output
MCP120T-460FI - Microcontroller Supervisory Circuit with Open Drain Output
MCP120T-460GI - Microcontroller Supervisory Circuit with Open Drain Output
MCP120T-460HI - Microcontroller Supervisory Circuit with Open Drain Output
MCP120T-460I/TT - The MCP120 isA Voltage Supervisory Device Designed to KeepA Microcontroller in Reset Until The System Voltage Has Reached The Proper Level and Stabilized
MCP120T-475DI - Microcontroller Supervisory Circuit with Open Drain Output
MCP120T-475FI - Microcontroller Supervisory Circuit with Open Drain Output
MCP120T-475GI - Microcontroller Supervisory Circuit with Open Drain Output
MCP120T-475HI - Microcontroller Supervisory Circuit with Open Drain Output
MCP120T-475I/TT - The MCP120 isA Voltage Supervisory Device Designed to KeepA Microcontroller in Reset Until The System Voltage Has Reached The Proper Level and Stabilized
MCP120T-485DI - Microcontroller Supervisory Circuit with Open Drain Output
MCP120T-485FI - Microcontroller Supervisory Circuit with Open Drain Output
MCP120T-485GI - Microcontroller Supervisory Circuit with Open Drain Output
MCP120T-485HI - Microcontroller Supervisory Circuit with Open Drain Output
MCP120T-485I/TT - The MCP120 isA Voltage Supervisory Device Designed to KeepA Microcontroller in Reset Until The System Voltage Has Reached The Proper Level and Stabilized
MCP121 - Micropower Voltage SupervisorsThe MCP102/103/121/131 are voltage supervisordevices designed to keepA microcontroller in resetuntil the system voltage has reached and stabilized atthe proper level for reliable system operation. The tablebelow shows the available features for these devices.Features• Ultra low supply current: 1.75 µA (steady state max.)• Precision monitoring options of:- 1.90V, 2.32V, 2.63V, 2.93V, 3.08V, 4.38Vand 4.63V• Resets microcontroller inA power-loss event• RST pin (Active-low):- MCP
MCP121T-195I/LB - Micropower Voltage SupervisorsThe MCP102/103/121/131 are voltage supervisordevices designed to keepA microcontroller in resetuntil the system voltage has reached and stabilized atthe proper level for reliable system operation. The tablebelow shows the available features for these devices.Features• Ultra low supply current: 1.75 µA (steady state max.)• Precision monitoring options of:- 1.90V, 2.32V, 2.63V, 2.93V, 3.08V, 4.38Vand 4.63V• Resets microcontroller inA power-loss event• RST pin (Active-low):- MCP
MCP121T-195I/TT - Micropower Voltage SupervisorsThe MCP102/103/121/131 are voltage supervisordevices designed to keepA microcontroller in resetuntil the system voltage has reached and stabilized atthe proper level for reliable system operation. The tablebelow shows the available features for these devices.Features• Ultra low supply current: 1.75 µA (steady state max.)• Precision monitoring options of:- 1.90V, 2.32V, 2.63V, 2.93V, 3.08V, 4.38Vand 4.63V• Resets microcontroller inA power-loss event• RST pin (Active-low):- MCP
MCP121T-240E/LB - Micropower Voltage SupervisorsThe MCP102/103/121/131 are voltage supervisordevices designed to keepA microcontroller in resetuntil the system voltage has reached and stabilized atthe proper level for reliable system operation. The tablebelow shows the available features for these devices.Features• Ultra low supply current: 1.75 µA (steady state max.)• Precision monitoring options of:- 1.90V, 2.32V, 2.63V, 2.93V, 3.08V, 4.38Vand 4.63V• Resets microcontroller inA power-loss event• RST pin (Active-low):- MCP
MCP121T-240ETT - Micropower Voltage SupervisorsThe MCP102/103/121/131 are voltage supervisordevices designed to keepA microcontroller in resetuntil the system voltage has reached and stabilized atthe proper level for reliable system operation. The tablebelow shows the available features for these devices.Features• Ultra low supply current: 1.75 µA (steady state max.)• Precision monitoring options of:- 1.90V, 2.32V, 2.63V, 2.93V, 3.08V, 4.38Vand 4.63V• Resets microcontroller inA power-loss event• RST pin (Active-low):- MCP
MCP121T-270E/LB - Micropower Voltage SupervisorsThe MCP102/103/121/131 are voltage supervisordevices designed to keepA microcontroller in resetuntil the system voltage has reached and stabilized atthe proper level for reliable system operation. The tablebelow shows the available features for these devices.Features• Ultra low supply current: 1.75 µA (steady state max.)• Precision monitoring options of:- 1.90V, 2.32V, 2.63V, 2.93V, 3.08V, 4.38Vand 4.63V• Resets microcontroller inA power-loss event• RST pin (Active-low):- MCP
MCP121T-270E/TT - Micropower Voltage SupervisorsThe MCP102/103/121/131 are voltage supervisordevices designed to keepA microcontroller in resetuntil the system voltage has reached and stabilized atthe proper level for reliable system operation. The tablebelow shows the available features for these devices.Features• Ultra low supply current: 1.75 µA (steady state max.)• Precision monitoring options of:- 1.90V, 2.32V, 2.63V, 2.93V, 3.08V, 4.38Vand 4.63V• Resets microcontroller inA power-loss event• RST pin (Active-low):- MCP
MCP121T-300E/LB - Micropower Voltage SupervisorsThe MCP102/103/121/131 are voltage supervisordevices designed to keepA microcontroller in resetuntil the system voltage has reached and stabilized atthe proper level for reliable system operation. The tablebelow shows the available features for these devices.Features• Ultra low supply current: 1.75 µA (steady state max.)• Precision monitoring options of:- 1.90V, 2.32V, 2.63V, 2.93V, 3.08V, 4.38Vand 4.63V• Resets microcontroller inA power-loss event• RST pin (Active-low):- MCP
MCP121T-300E/TT - Micropower Voltage SupervisorsThe MCP102/103/121/131 are voltage supervisordevices designed to keepA microcontroller in resetuntil the system voltage has reached and stabilized atthe proper level for reliable system operation. The tablebelow shows the available features for these devices.Features• Ultra low supply current: 1.75 µA (steady state max.)• Precision monitoring options of:- 1.90V, 2.32V, 2.63V, 2.93V, 3.08V, 4.38Vand 4.63V• Resets microcontroller inA power-loss event• RST pin (Active-low):- MCP
MCP121T-315E/LB - Micropower Voltage SupervisorsThe MCP102/103/121/131 are voltage supervisordevices designed to keepA microcontroller in resetuntil the system voltage has reached and stabilized atthe proper level for reliable system operation. The tablebelow shows the available features for these devices.Features• Ultra low supply current: 1.75 µA (steady state max.)• Precision monitoring options of:- 1.90V, 2.32V, 2.63V, 2.93V, 3.08V, 4.38Vand 4.63V• Resets microcontroller inA power-loss event• RST pin (Active-low):- MCP
MCP121T-315E/TT - Micropower Voltage SupervisorsThe MCP102/103/121/131 are voltage supervisordevices designed to keepA microcontroller in resetuntil the system voltage has reached and stabilized atthe proper level for reliable system operation. The tablebelow shows the available features for these devices.Features• Ultra low supply current: 1.75 µA (steady state max.)• Precision monitoring options of:- 1.90V, 2.32V, 2.63V, 2.93V, 3.08V, 4.38Vand 4.63V• Resets microcontroller inA power-loss event• RST pin (Active-low):- MCP
MCP121T-450E/LB - Micropower Voltage SupervisorsThe MCP102/103/121/131 are voltage supervisordevices designed to keepA microcontroller in resetuntil the system voltage has reached and stabilized atthe proper level for reliable system operation. The tablebelow shows the available features for these devices.Features• Ultra low supply current: 1.75 µA (steady state max.)• Precision monitoring options of:- 1.90V, 2.32V, 2.63V, 2.93V, 3.08V, 4.38Vand 4.63V• Resets microcontroller inA power-loss event• RST pin (Active-low):- MCP
MCP121T-450E/TT - Micropower Voltage SupervisorsThe MCP102/103/121/131 are voltage supervisordevices designed to keepA microcontroller in resetuntil the system voltage has reached and stabilized atthe proper level for reliable system operation. The tablebelow shows the available features for these devices.Features• Ultra low supply current: 1.75 µA (steady state max.)• Precision monitoring options of:- 1.90V, 2.32V, 2.63V, 2.93V, 3.08V, 4.38Vand 4.63V• Resets microcontroller inA power-loss event• RST pin (Active-low):- MCP
MCP121T-475E/LB - Micropower Voltage SupervisorsThe MCP102/103/121/131 are voltage supervisordevices designed to keepA microcontroller in resetuntil the system voltage has reached and stabilized atthe proper level for reliable system operation. The tablebelow shows the available features for these devices.Features• Ultra low supply current: 1.75 µA (steady state max.)• Precision monitoring options of:- 1.90V, 2.32V, 2.63V, 2.93V, 3.08V, 4.38Vand 4.63V• Resets microcontroller inA power-loss event• RST pin (Active-low):- MCP
MCP121T-475E/TT - Micropower Voltage SupervisorsThe MCP102/103/121/131 are voltage supervisordevices designed to keepA microcontroller in resetuntil the system voltage has reached and stabilized atthe proper level for reliable system operation. The tablebelow shows the available features for these devices.Features• Ultra low supply current: 1.75 µA (steady state max.)• Precision monitoring options of:- 1.90V, 2.32V, 2.63V, 2.93V, 3.08V, 4.38Vand 4.63V• Resets microcontroller inA power-loss event• RST pin (Active-low):- MCP
MCP1253-33X50 - The MCP1253-33X50 is an Inductorless, Positive Regulating, Low Noise Charge Pump Dc-to-dc Converter
MCP1253-ADJ - The MCP1253-ADJ is an Inductorless, Positive Regulating, Low Noise Charge Pump Dc-to-dc Converter
MCP1253-ADJI/MS - The MCP1253-ADJ is an Inductorless, Positive Regulating, Low Noise Charge Pump Dc-to-dc Converter
MCP1256 - Regulated 3.3V, Low-Ripple Charge Pump with Low-Operating Current SLEEP Mode or BYPASS ModeThe MCP1256, MCP1257, MCP1258 and MCP1259are inductorless, positive regulated charge pumpDC/DC converters. The devices generateA regulated3.3V output voltage fromA 1.8V to 3.6V input. Thedevices are specifically designed for applicationsoperating from 2-cell alkaline, Ni-Cd, or Ni-MHbatteries or by one primary lithium MnO2 (or similar)coin cell battery.The MCP1256, MCP1257, MCP1258 and MCP1259provide high efficiency
MCP1257 - Regulated 3.3V, Low-Ripple Charge Pump with Low-Operating Current SLEEP Mode or BYPASS ModeThe MCP1256, MCP1257, MCP1258 and MCP1259are inductorless, positive regulated charge pumpDC/DC converters. The devices generateA regulated3.3V output voltage fromA 1.8V to 3.6V input. Thedevices are specifically designed for applicationsoperating from 2-cell alkaline, Ni-Cd, or Ni-MHbatteries or by one primary lithium MnO2 (or similar)coin cell battery.The MCP1256, MCP1257, MCP1258 and MCP1259provide high efficiency
MCP1258 - Regulated 3.3V, Low-Ripple Charge Pump with Low-Operating Current SLEEP Mode or BYPASS ModeThe MCP1256, MCP1257, MCP1258 and MCP1259are inductorless, positive regulated charge pumpDC/DC converters. The devices generateA regulated3.3V output voltage fromA 1.8V to 3.6V input. Thedevices are specifically designed for applicationsoperating from 2-cell alkaline, Ni-Cd, or Ni-MHbatteries or by one primary lithium MnO2 (or similar)coin cell battery.The MCP1256, MCP1257, MCP1258 and MCP1259provide high efficiency
MCP1259 - Regulated 3.3V, Low-Ripple Charge Pump with Low-Operating Current SLEEP Mode or BYPASS ModeThe MCP1256, MCP1257, MCP1258 and MCP1259are inductorless, positive regulated charge pumpDC/DC converters. The devices generateA regulated3.3V output voltage fromA 1.8V to 3.6V input. Thedevices are specifically designed for applicationsoperating from 2-cell alkaline, Ni-Cd, or Ni-MHbatteries or by one primary lithium MnO2 (or similar)coin cell battery.The MCP1256, MCP1257, MCP1258 and MCP1259provide high efficiency
MCP130 - Microcontroller Supervisory Circuit with Open Drain Output
MCP130-270DI - Microcontroller Supervisory Circuit with Open Drain Output
MCP130-270FI - Microcontroller Supervisory Circuit with Open Drain Output
MCP130-270GI - Microcontroller Supervisory Circuit with Open Drain Output
MCP130-270HI - Microcontroller Supervisory Circuit with Open Drain Output
MCP130-300DI - Microcontroller Supervisory Circuit with Open Drain Output
MCP130-300FI - Microcontroller Supervisory Circuit with Open Drain Output
MCP130-300GI - Microcontroller Supervisory Circuit with Open Drain Output
MCP130-300HI - Microcontroller Supervisory Circuit with Open Drain Output
MCP130-315DI - Microcontroller Supervisory Circuit with Open Drain Output
MCP130-315FI - Microcontroller Supervisory Circuit with Open Drain Output
MCP130-315GI - Microcontroller Supervisory Circuit with Open Drain Output
MCP130-315HI - Microcontroller Supervisory Circuit with Open Drain Output
MCP130-450DI - Microcontroller Supervisory Circuit with Open Drain Output
MCP130-450FI - Microcontroller Supervisory Circuit with Open Drain Output
MCP130-450GI - Microcontroller Supervisory Circuit with Open Drain Output
MCP130-450HI - Microcontroller Supervisory Circuit with Open Drain Output
MCP130-460DI - Microcontroller Supervisory Circuit with Open Drain Output
MCP130-460FI - Microcontroller Supervisory Circuit with Open Drain Output
MCP130-460GI - Microcontroller Supervisory Circuit with Open Drain Output
MCP130-460HI - Microcontroller Supervisory Circuit with Open Drain Output
MCP130-475DI - Microcontroller Supervisory Circuit with Open Drain Output
MCP130-475FI - Microcontroller Supervisory Circuit with Open Drain Output
MCP130-475GI - Microcontroller Supervisory Circuit with Open Drain Output
MCP130-475HI - Microcontroller Supervisory Circuit with Open Drain Output
MCP130-485DI - Microcontroller Supervisory Circuit with Open Drain Output
MCP130-485FI - Microcontroller Supervisory Circuit with Open Drain Output
MCP130-485GI - Microcontroller Supervisory Circuit with Open Drain Output
MCP130-485HI - Microcontroller Supervisory Circuit with Open Drain Output
MCP130T - Microcontroller Supervisory Circuit with Open Drain Output
MCP130T-270DI - Microcontroller Supervisory Circuit with Open Drain Output
MCP130T-270FI - Microcontroller Supervisory Circuit with Open Drain Output
MCP130T-270GI - Microcontroller Supervisory Circuit with Open Drain Output
MCP130T-270HI - Microcontroller Supervisory Circuit with Open Drain Output
MCP130T-270I/TT - The MCP130 isA Voltage Supervisory Device Designed to KeepA Microcontroller in Reset Until The System Voltage Has Reached The Proper Level and Stabilized
MCP130T-300DI - Microcontroller Supervisory Circuit with Open Drain Output
MCP130T-300FI - Microcontroller Supervisory Circuit with Open Drain Output
MCP130T-300GI - Microcontroller Supervisory Circuit with Open Drain Output
MCP130T-300HI - Microcontroller Supervisory Circuit with Open Drain Output
MCP130T-300I/TT - The MCP130 isA Voltage Supervisory Device Designed to KeepA Microcontroller in Reset Until The System Voltage Has Reached The Proper Level and Stabilized
MCP130T-315DI - Microcontroller Supervisory Circuit with Open Drain Output
MCP130T-315FI - Microcontroller Supervisory Circuit with Open Drain Output
MCP130T-315GI - Microcontroller Supervisory Circuit with Open Drain Output
MCP130T-315HI - Microcontroller Supervisory Circuit with Open Drain Output
MCP130T-315I/TT - The MCP130 isA Voltage Supervisory Device Designed to KeepA Microcontroller in Reset Until The System Voltage Has Reached The Proper Level and Stabilized
MCP130T-450DI - Microcontroller Supervisory Circuit with Open Drain Output
MCP130T-450FI - Microcontroller Supervisory Circuit with Open Drain Output
MCP130T-450GI - Microcontroller Supervisory Circuit with Open Drain Output
MCP130T-450HI - Microcontroller Supervisory Circuit with Open Drain Output
MCP130T-450I/TT - The MCP130 isA Voltage Supervisory Device Designed to KeepA Microcontroller in Reset Until The System Voltage Has Reached The Proper Level and Stabilized
MCP130T-460DI - Microcontroller Supervisory Circuit with Open Drain Output
MCP130T-460FI - Microcontroller Supervisory Circuit with Open Drain Output
MCP130T-460GI - Microcontroller Supervisory Circuit with Open Drain Output
MCP130T-460HI - Microcontroller Supervisory Circuit with Open Drain Output
MCP130T-460I/TT - The MCP130 isA Voltage Supervisory Device Designed to KeepA Microcontroller in Reset Until The System Voltage Has Reached The Proper Level and Stabilized
MCP130T-475DI - Microcontroller Supervisory Circuit with Open Drain Output
MCP130T-475FI - Microcontroller Supervisory Circuit with Open Drain Output
MCP130T-475GI - Microcontroller Supervisory Circuit with Open Drain Output
MCP130T-475HI - Microcontroller Supervisory Circuit with Open Drain Output
MCP130T-475I/TT - The MCP130 isA Voltage Supervisory Device Designed to KeepA Microcontroller in Reset Until The System Voltage Has Reached The Proper Level and Stabilized
MCP130T-485DI - Microcontroller Supervisory Circuit with Open Drain Output
MCP130T-485FI - Microcontroller Supervisory Circuit with Open Drain Output
MCP130T-485GI - Microcontroller Supervisory Circuit with Open Drain Output
MCP130T-485HI - Microcontroller Supervisory Circuit with Open Drain Output
MCP130T-485I/TT - The MCP130 isA Voltage Supervisory Device Designed to KeepA Microcontroller in Reset Until The System Voltage Has Reached The Proper Level and Stabilized
MCP130-xxx - The MCP130 isA Voltage Supervisory Device Designed to KeepA Microcontroller in Reset Until The System Voltage Has Reached The Proper Level and Stabilized
MCP131 - Micropower Voltage SupervisorsThe MCP102/103/121/131 are voltage supervisordevices designed to keepA microcontroller in resetuntil the system voltage has reached and stabilized atthe proper level for reliable system operation. The tablebelow shows the available features for these devices.Features• Ultra low supply current: 1.75 µA (steady state max.)• Precision monitoring options of:- 1.90V, 2.32V, 2.63V, 2.93V, 3.08V, 4.38Vand 4.63V• Resets microcontroller inA power-loss event• RST pin (Active-low):- MCP
MCP1316 - Features Low supply current: 1 μA (typ.), 10 μA (max.) Precision monitoring trip point options:- 2.9V and 4.6V (Standard Offerings)- 2.0V to 4.7V in 100 mV increments,(Contact the local Microchip Sales Office) Resets microcontroller inA power-loss event Reset Delay Time Out Option:- 1.4 ms, 30 ms, 200 ms, or 1.6s (typ.) Watchdog Timer Input Time Out Options:- 6.3 ms, 102 ms, 1.6s or 25.6s (typ.) Manual Reset (MR) input (active-low) Single and complementar
MCP1316MT-29LE/OT - Features Low supply current: 1 μA (typ.), 10 μA (max.) Precision monitoring trip point options:- 2.9V and 4.6V (Standard Offerings)- 2.0V to 4.7V in 100 mV increments,(Contact the local Microchip Sales Office) Resets microcontroller inA power-loss event Reset Delay Time Out Option:- 1.4 ms, 30 ms, 200 ms, or 1.6s (typ.) Watchdog Timer Input Time Out Options:- 6.3 ms, 102 ms, 1.6s or 25.6s (typ.) Manual Reset (MR) input (active-low) Single and complementar
MCP1316T-29LE/OT - Features Low supply current: 1 μA (typ.), 10 μA (max.) Precision monitoring trip point options:- 2.9V and 4.6V (Standard Offerings)- 2.0V to 4.7V in 100 mV increments,(Contact the local Microchip Sales Office) Resets microcontroller inA power-loss event Reset Delay Time Out Option:- 1.4 ms, 30 ms, 200 ms, or 1.6s (typ.) Watchdog Timer Input Time Out Options:- 6.3 ms, 102 ms, 1.6s or 25.6s (typ.) Manual Reset (MR) input (active-low) Single and complementar
MCP131T-195I/LB - Micropower Voltage SupervisorsThe MCP102/103/121/131 are voltage supervisordevices designed to keepA microcontroller in resetuntil the system voltage has reached and stabilized atthe proper level for reliable system operation. The tablebelow shows the available features for these devices.Features• Ultra low supply current: 1.75 µA (steady state max.)• Precision monitoring options of:- 1.90V, 2.32V, 2.63V, 2.93V, 3.08V, 4.38Vand 4.63V• Resets microcontroller inA power-loss event• RST pin (Active-low):- MCP
MCP131T-195I/TT - Micropower Voltage SupervisorsThe MCP102/103/121/131 are voltage supervisordevices designed to keepA microcontroller in resetuntil the system voltage has reached and stabilized atthe proper level for reliable system operation. The tablebelow shows the available features for these devices.Features• Ultra low supply current: 1.75 µA (steady state max.)• Precision monitoring options of:- 1.90V, 2.32V, 2.63V, 2.93V, 3.08V, 4.38Vand 4.63V• Resets microcontroller inA power-loss event• RST pin (Active-low):- MCP
MCP131T-240E/LB - Micropower Voltage SupervisorsThe MCP102/103/121/131 are voltage supervisordevices designed to keepA microcontroller in resetuntil the system voltage has reached and stabilized atthe proper level for reliable system operation. The tablebelow shows the available features for these devices.Features• Ultra low supply current: 1.75 µA (steady state max.)• Precision monitoring options of:- 1.90V, 2.32V, 2.63V, 2.93V, 3.08V, 4.38Vand 4.63V• Resets microcontroller inA power-loss event• RST pin (Active-low):- MCP
MCP131T-240ETT - Micropower Voltage SupervisorsThe MCP102/103/121/131 are voltage supervisordevices designed to keepA microcontroller in resetuntil the system voltage has reached and stabilized atthe proper level for reliable system operation. The tablebelow shows the available features for these devices.Features• Ultra low supply current: 1.75 µA (steady state max.)• Precision monitoring options of:- 1.90V, 2.32V, 2.63V, 2.93V, 3.08V, 4.38Vand 4.63V• Resets microcontroller inA power-loss event• RST pin (Active-low):- MCP
MCP131T-270E/LB - Micropower Voltage SupervisorsThe MCP102/103/121/131 are voltage supervisordevices designed to keepA microcontroller in resetuntil the system voltage has reached and stabilized atthe proper level for reliable system operation. The tablebelow shows the available features for these devices.Features• Ultra low supply current: 1.75 µA (steady state max.)• Precision monitoring options of:- 1.90V, 2.32V, 2.63V, 2.93V, 3.08V, 4.38Vand 4.63V• Resets microcontroller inA power-loss event• RST pin (Active-low):- MCP
MCP131T-270E/TT - Micropower Voltage SupervisorsThe MCP102/103/121/131 are voltage supervisordevices designed to keepA microcontroller in resetuntil the system voltage has reached and stabilized atthe proper level for reliable system operation. The tablebelow shows the available features for these devices.Features• Ultra low supply current: 1.75 µA (steady state max.)• Precision monitoring options of:- 1.90V, 2.32V, 2.63V, 2.93V, 3.08V, 4.38Vand 4.63V• Resets microcontroller inA power-loss event• RST pin (Active-low):- MCP
MCP131T-300E/LB - Micropower Voltage SupervisorsThe MCP102/103/121/131 are voltage supervisordevices designed to keepA microcontroller in resetuntil the system voltage has reached and stabilized atthe proper level for reliable system operation. The tablebelow shows the available features for these devices.Features• Ultra low supply current: 1.75 µA (steady state max.)• Precision monitoring options of:- 1.90V, 2.32V, 2.63V, 2.93V, 3.08V, 4.38Vand 4.63V• Resets microcontroller inA power-loss event• RST pin (Active-low):- MCP
MCP131T-300E/TT - Micropower Voltage SupervisorsThe MCP102/103/121/131 are voltage supervisordevices designed to keepA microcontroller in resetuntil the system voltage has reached and stabilized atthe proper level for reliable system operation. The tablebelow shows the available features for these devices.Features• Ultra low supply current: 1.75 µA (steady state max.)• Precision monitoring options of:- 1.90V, 2.32V, 2.63V, 2.93V, 3.08V, 4.38Vand 4.63V• Resets microcontroller inA power-loss event• RST pin (Active-low):- MCP
MCP131T-315E/LB - Micropower Voltage SupervisorsThe MCP102/103/121/131 are voltage supervisordevices designed to keepA microcontroller in resetuntil the system voltage has reached and stabilized atthe proper level for reliable system operation. The tablebelow shows the available features for these devices.Features• Ultra low supply current: 1.75 µA (steady state max.)• Precision monitoring options of:- 1.90V, 2.32V, 2.63V, 2.93V, 3.08V, 4.38Vand 4.63V• Resets microcontroller inA power-loss event• RST pin (Active-low):- MCP
MCP131T-315E/TT - Micropower Voltage SupervisorsThe MCP102/103/121/131 are voltage supervisordevices designed to keepA microcontroller in resetuntil the system voltage has reached and stabilized atthe proper level for reliable system operation. The tablebelow shows the available features for these devices.Features• Ultra low supply current: 1.75 µA (steady state max.)• Precision monitoring options of:- 1.90V, 2.32V, 2.63V, 2.93V, 3.08V, 4.38Vand 4.63V• Resets microcontroller inA power-loss event• RST pin (Active-low):- MCP
MCP131T-450E/LB - Micropower Voltage SupervisorsThe MCP102/103/121/131 are voltage supervisordevices designed to keepA microcontroller in resetuntil the system voltage has reached and stabilized atthe proper level for reliable system operation. The tablebelow shows the available features for these devices.Features• Ultra low supply current: 1.75 µA (steady state max.)• Precision monitoring options of:- 1.90V, 2.32V, 2.63V, 2.93V, 3.08V, 4.38Vand 4.63V• Resets microcontroller inA power-loss event• RST pin (Active-low):- MCP
MCP131T-450E/TT - Micropower Voltage SupervisorsThe MCP102/103/121/131 are voltage supervisordevices designed to keepA microcontroller in resetuntil the system voltage has reached and stabilized atthe proper level for reliable system operation. The tablebelow shows the available features for these devices.Features• Ultra low supply current: 1.75 µA (steady state max.)• Precision monitoring options of:- 1.90V, 2.32V, 2.63V, 2.93V, 3.08V, 4.38Vand 4.63V• Resets microcontroller inA power-loss event• RST pin (Active-low):- MCP
MCP131T-475E/LB - Micropower Voltage SupervisorsThe MCP102/103/121/131 are voltage supervisordevices designed to keepA microcontroller in resetuntil the system voltage has reached and stabilized atthe proper level for reliable system operation. The tablebelow shows the available features for these devices.Features• Ultra low supply current: 1.75 µA (steady state max.)• Precision monitoring options of:- 1.90V, 2.32V, 2.63V, 2.93V, 3.08V, 4.38Vand 4.63V• Resets microcontroller inA power-loss event• RST pin (Active-low):- MCP
MCP131T-475E/TT - Micropower Voltage SupervisorsThe MCP102/103/121/131 are voltage supervisordevices designed to keepA microcontroller in resetuntil the system voltage has reached and stabilized atthe proper level for reliable system operation. The tablebelow shows the available features for these devices.Features• Ultra low supply current: 1.75 µA (steady state max.)• Precision monitoring options of:- 1.90V, 2.32V, 2.63V, 2.93V, 3.08V, 4.38Vand 4.63V• Resets microcontroller inA power-loss event• RST pin (Active-low):- MCP
MCP1700T-1202E/MB - The MCP1700 isA CMOS Low Dropout Positive Voltage Regulator Which CAN Source up to 250m...
MCP1700T-1202E/TT - The MCP1700 isA CMOS Low Dropout Positive Voltage Regulator Which CAN Source up to 250m...
MCP1700T-1802E/MB - The MCP1700 isA CMOS Low Dropout Positive Voltage Regulator Which CAN Source up to 250m...
MCP1700T-1802E/TT - The MCP1700 isA CMOS Low Dropout Positive Voltage Regulator Which CAN Source up to 250m...
MCP1700T-2502E/MB - The MCP1700 isA CMOS Low Dropout Positive Voltage Regulator Which CAN Source up to 250m...
MCP1700T-2502E/TT - The MCP1700 isA CMOS Low Dropout Positive Voltage Regulator Which CAN Source up to 250m...
MCP1700T-3002E/MB - The MCP1700 isA CMOS Low Dropout Positive Voltage Regulator Which CAN Source up to 250m...
MCP1700T-3002E/TT - The MCP1700 isA CMOS Low Dropout Positive Voltage Regulator Which CAN Source up to 250m...
MCP1700T-3302E/MB - The MCP1700 isA CMOS Low Dropout Positive Voltage Regulator Which CAN Source up to 250m...
MCP1700T-3302E/TT - The MCP1700 isA CMOS Low Dropout Positive Voltage Regulator Which CAN Source up to 250m...
MCP1700T-5002E/MB - The MCP1700 isA CMOS Low Dropout Positive Voltage Regulator Which CAN Source up to 250m...
MCP1700T-5002E/TT - The MCP1700 isA CMOS Low Dropout Positive Voltage Regulator Which CAN Source up to 250m...
MCP1701 - 2ua Low Dropoout Positive Voltage Refulator
MCP1701A - 2 мA Low-Dropout Positive Voltage RegulatorThe MCP1701A isA family of CMOS low-dropout,positive voltage regulators that can deliver up to250 mA of current while consuming only 2.0 мA ofquiescent current (typ.). The input operating range isspecified up to 10V, making it ideal for lithium-ion (oneor two cells), 9V alkaline and other two and threeprimary cell battery-powered applications.The MCP1701A is capable of delivering 250 mA withan input-to-output voltage differential (dropout voltage)of 650 mV. The lo
MCP1726 - 1a, Low Voltage, Low Quiescent Current Ldo Regulator
MCP1727 - The MCP1727 isA 1.5A, ceramic output cap stable, low output voltage Low Dropout Regulator (LDO) with shutdown and user-programmable delay power good functions. It is the ONLY 1.5A LDO on the market that incorporates shutdown, power good, and programmable power good delay features onA signal device.
MCP2120-I/P - The MCP2120 isA Low-cost, High-performance, Fully-static Infrared Encoder/decoder
MCP2120-I/SL - The MCP2120 isA Low-cost, High-performance, Fully-static Infrared Encoder/decoder
MCP2140 - The MCP2140 Embeds Irda Protocol Handling and Bit Encoding/decoding, and Provides The Lowest Cost, Lowest Power Consumption Solution For Adding Irda Connectivity to Embedded Systems
MCP2140-I/P - The MCP2140 Embeds Irda Protocol Handling and Bit Encoding/decoding, and Provides The Lowest Cost, Lowest Power Consumption Solution For Adding Irda Connectivity to Embedded Systems
MCP2140-I/SO - The MCP2140 Embeds Irda Protocol Handling and Bit Encoding/decoding, and Provides The Lowest Cost, Lowest Power Consumption Solution For Adding Irda Connectivity to Embedded Systems
MCP2150HC - The MCP2150 Provides Irda Protocol Handling Plus Bit Encoding/decoding Functionality For Data Terminal Equipment (DTE) Applications in One Low Pincount Device
MCP2150-I/P - The MCP2150 Provides Irda Protocol Handling Plus Bit Encoding/decoding Functionality For Data Terminal Equipment (DTE) Applications in One Low Pincount Device
MCP2150-I/SO - The MCP2150 Provides Irda Protocol Handling Plus Bit Encoding/decoding Functionality For Data Terminal Equipment (DTE) Applications in One Low Pincount Device
MCP2150I/SS - The MCP2150 Provides Irda Protocol Handling Plus Bit Encoding/decoding Functionality For Data Terminal Equipment (DTE) Applications in One Low Pincount Device
MCP2155 - The MCP2155 Provided Irda Protocol Handling Plus Bit Encoding/decoding Functionality For Data Communication Equipment (DCE) Applications in One Low Pincount Device
MCP23008 - 8-bit I/o Expander With Serial Interface
MCP2510 - Stand-alone Can Controller With Spi Interface
MCP2510-EP - Stand-Alone CAN Controller with SPI Interface
MCP2510-ESO - Stand-Alone CAN Controller with SPI Interface
MCP2510-EST - Stand-Alone CAN Controller with SPI Interface
MCP2510-IP - Stand-Alone CAN Controller with SPI Interface
MCP2510-ISO - Stand-Alone CAN Controller with SPI Interface
MCP2510-IST - Stand-Alone CAN Controller with SPI Interface
MCP2510T - The MCP2510 18-pin Stand-alone CAN (Control Area Network) Controller Features an Industry Standard Spi Serial Interface, Enabling an Easy Connection to Virtually Any Microcontroller
MCP2510T-I/ST - The MCP2510 18-pin Stand-alone CAN (Control Area Network) Controller Features an Industry Standard Spi Serial Interface, Enabling an Easy Connection to Virtually Any Microcontroller
MCP2515 - Stand-Alone CAN Controller With SPI™ InterfaceMicrochip Technology’s MCP2515 isA stand-aloneController Area Network (CAN) controller that implementsthe CAN specification, version 2.0B. It is capableof transmitting and receiving both standard andextended data and remote frames. The MCP2515 hastwo acceptance masks and six acceptance filters thatare used to filter out unwanted messages, therebyreducing the host MCUs overhead. The MCP2515interfaces with microcontrollers (MCUs) via an industrystandard Serial Pe
MCP2515-E/SO - Stand-Alone CAN Controller With SPI™ InterfaceMicrochip Technology’s MCP2515 isA stand-aloneController Area Network (CAN) controller that implementsthe CAN specification, version 2.0B. It is capableof transmitting and receiving both standard andextended data and remote frames. The MCP2515 hastwo acceptance masks and six acceptance filters thatare used to filter out unwanted messages, therebyreducing the host MCUs overhead. The MCP2515interfaces with microcontrollers (MCUs) via an industrystandard Serial Pe
MCP2515-I/P - Stand-Alone CAN Controller With SPI™ InterfaceMicrochip Technology’s MCP2515 isA stand-aloneController Area Network (CAN) controller that implementsthe CAN specification, version 2.0B. It is capableof transmitting and receiving both standard andextended data and remote frames. The MCP2515 hastwo acceptance masks and six acceptance filters thatare used to filter out unwanted messages, therebyreducing the host MCUs overhead. The MCP2515interfaces with microcontrollers (MCUs) via an industrystandard Serial Pe
MCP2515I/ST256 - Stand-Alone CAN Controller With SPI™ InterfaceMicrochip Technology’s MCP2515 isA stand-aloneController Area Network (CAN) controller that implementsthe CAN specification, version 2.0B. It is capableof transmitting and receiving both standard andextended data and remote frames. The MCP2515 hastwo acceptance masks and six acceptance filters thatare used to filter out unwanted messages, therebyreducing the host MCUs overhead. The MCP2515interfaces with microcontrollers (MCUs) via an industrystandard Serial Pe
MCP3004-I/P - The MCP3004 10-bit Analog-to-digital Converter (ADC) Combines High Performance and Low Power Consumption inA Small Package, Making it Ideal For Embedded Control Applications
MCP3004ISL - The MCP3004 10-bit Analog-to-digital Converter (ADC) Combines High Performance and Low Power Consumption inA Small Package, Making it Ideal For Embedded Control Applications
MCP3008-I/P - The MCP3008 10-bit Analog-to-digital Converter (ADC) Combines High Performance and Low Power Consumption inA Small Package, Making it Ideal For Embedded Control Applications
MCP3008-I/SL - The MCP3008 10-bit Analog-to-digital Converter (ADC) Combines High Performance and Low Power Consumption inA Small Package, Making it Ideal For Embedded Control Applications
MCP3201 - 2.7v 12-bit A/d Converter With Spi Serial Interface
MCP3201-BIP - 2.7V 12-Bit A/D Converter with SPI Serial Interface
MCP3201-BISN - 2.7V 12-Bit A/D Converter with SPI Serial Interface
MCP3201-BIST - 2.7V 12-Bit A/D Converter with SPI Serial Interface
MCP3201-CIP - 2.7V 12-Bit A/D Converter with SPI Serial Interface
MCP3201-CISN - 2.7V 12-Bit A/D Converter with SPI Serial Interface
MCP3201-CIST - 2.7V 12-Bit A/D Converter with SPI Serial Interface
MCP3201I - The MCP3201 12-bit Analog-to-digital Converter (ADC) Combines High Performance and Low Power Consumption inA Small Package, Making it Ideal For Embedded Control Applications
MCP3202 - 2.7v Dual Channel 12-bit A/d Converter With Spi Serial Interface
MCP3202-BIP - 2.7V Dual Channel 12-Bit A/D Converter with SPI Serial Interface
MCP3202-BISN - 2.7V Dual Channel 12-Bit A/D Converter with SPI Serial Interface
MCP3202-BIST - 2.7V Dual Channel 12-Bit A/D Converter with SPI Serial Interface
MCP3202-CIP - 2.7V Dual Channel 12-Bit A/D Converter with SPI Serial Interface
MCP3202-CISN - 2.7V Dual Channel 12-Bit A/D Converter with SPI Serial Interface
MCP3202-CIST - 2.7V Dual Channel 12-Bit A/D Converter with SPI Serial Interface
MCP3202I - The MCP3202 12-bit Analog-to-digital Converter (ADC) Combines High Performance and Low Power Consumption inA Small Package, Making it Ideal For Embedded Control Applications
MCP3204 - 2.7v 4-channel/8-channel 12-bit A/d Converters With Spi Serial Interface
MCP3204-B - The MCP3204 12-bit Analog-to-digital Converter (ADC) Combines High Performance and Low Power Consumption inA Small Package, Making it Ideal For Embedded Control Applications
MCP3204-BIP - 2.7V 4-Channel/8-Channel 12-Bit A/D Converters with SPI Serial Interface
MCP3204-BISL - 2.7V 4-Channel/8-Channel 12-Bit A/D Converters with SPI Serial Interface
MCP3204-BIST - 2.7V 4-Channel/8-Channel 12-Bit A/D Converters with SPI Serial Interface
MCP3204-CIP - 2.7V 4-Channel/8-Channel 12-Bit A/D Converters with SPI Serial Interface
MCP3204-CISL - 2.7V 4-Channel/8-Channel 12-Bit A/D Converters with SPI Serial Interface
MCP3204-CIST - 2.7V 4-Channel/8-Channel 12-Bit A/D Converters with SPI Serial Interface
MCP3208 - 2.7V 4-Channel/8-Channel 12-Bit A/D Converters with SPI Serial Interface
MCP3208-B - The MCP3208 12-bit Analog-to-digital Converter (ADC) Combines High Performance and Low Power Consumption inA Small Package, Making it Ideal For Embedded Control Applications
MCP3208-BIP - 2.7V 4-Channel/8-Channel 12-Bit A/D Converters with SPI Serial Interface
MCP3208-BISL - 2.7V 4-Channel/8-Channel 12-Bit A/D Converters with SPI Serial Interface
MCP3208-CIP - 2.7V 4-Channel/8-Channel 12-Bit A/D Converters with SPI Serial Interface
MCP3208-CISL - 2.7V 4-Channel/8-Channel 12-Bit A/D Converters with SPI Serial Interface
MCP3221 - Low Power 12-bit A/d Converter With I2c Interface