MT9079APR - Advanced Controller For E1, Package Type = PLCC, No. Of Pins = 44
MT9080BPR - 2048 X 16 Bit Wide Variable Rate Digital Switch Matrix Module (SMX) For Digital Switching Matrices ; Package Type = PLCC ; No. Of Pins = 84
MT90812APR - 64 X 64 Channels Multi-featured Integrated Digital Switch (IDX) With Conferencing, DTMF and FSK Tone Generation For Soho and PBX Systems ; Package Type = PLCC ; No. Of Pins = 68
MT90840AL - 512 X 2430 Channel Multiple Rate TDM (2, 4, 8Mb/s) to Parallel Port Distributed Hyperchannel Switch (DHS) For STS-1 and STS-3 Applications ; Package Type = PQFP ; No. Of Pins = 100
MT9085B - 1024 Channels TDM (ST-BUS) to Parallel Bus Access Circuit (PAC)
MT9085BP - 1024 Channels TDM (ST-BUS) to Parallel Bus Access Circuit (PAC) ; Package Type = PLCC ; No. Of Pins = 68
MT9085BPR - 1024 Channels TDM (ST-BUS) to Parallel Bus Access Circuit (PAC) ; Package Type = PLCC ; No. Of Pins = 68
MT90863AG - 2,048 X 512 Channel 3.3V Rate Conversion Digital Switch (RCDX), H.100 Compatible ; Package Type = Bga ; No. Of Pins = 144
MT90863AL - 2,048 X 512 Channel 3.3V Rate Conversion Digital Switch (RCDX), H.100 Compatible ; Package Type = MQFP ; No. Of Pins = 128
MT90866 - Flexible 4 K X 2.4 K Channel Digital Switch With H.110 Interface and 2.4 K X 2.4 K Local Switch
MT90866AG - Flexible 4 K x 2.4 K Channel Digital Switch with H.110 Interface and 2.4 K x 2.4 K Local Switch
MT90866AG2 - Flexible 4 K x 2.4 K Channel Digital Switch with H.110 Interface and 2.4 K x 2.4 K Local Switch
MT90868 - 32,768 X 8,192 Channels High Bandwidth Digital Switch With up to 128 Streams on Backplane and 128 Streams on Local and Data Rates...
MT90868AG - 4,096 X 2,432 Channels Flexible Digital Switch With H.110 Interface ; Package Type = Pbga ; No. Of Pins = 466
MT9092APR - Fully Featured Digital Telephone Circuit With Embedded HDLC Transceiver and DSP For Tone Generations and Hands Free Operation ; Package Type = PLCC ; No. Of Pins = 44
MT9094APR - Fully Featured Digital Telephone Circuit With Embedded DSP For Tone Generations and Hands Free Operation ; Package Type = PLCC ; No. Of Pins = 44
MT9122APR - Dual Voice Echo CANceller (Itu-t G165 Compliant) With Disable Tone Detection ; Package Type = PLCC ; No. Of Pins = 28
MT9123APR - Dual Voice Echo CANceller (Itu-t G165 Compliant) ; Package Type = PLCC ; No. Of Pins = 28
MT9126ASR - Quad Adpcm (G.726) Transcoder, Package Type = Soic, No. Of Pins = 28
MT91610AQR - Short Loop Subscriber Line Interface Circuit (SLIC) With 2-4 Wire Conversion, Programmable Line Impedance, Ringing Amplification and On-hook Transmission For Did ; Package Type = Qsop ; No. Of Pins = 36
MT9171ANR - 2 Wire Full-duplex 2B+D (80/160Kb/s) Data Format Digital Subscriber Network Interface Circuit (range up to 3KM) ; Package Type = Ssop ; No. Of Pins = 24
MT9171APR - 2 Wire Full-duplex 2B+D (80/160Kb/s) Data Format Digital Subscriber Network Interface Circuit (range up to 3KM) ; Package Type = PLCC ; No. Of Pins = 28
MT9172APR - Description =, Package Type = PLCC, No. Of Pins = 28
MT9173ANR - 2 Wire Full-duplex 2B+D (80/160Kb/s) Data Format Digital Subscriber Network Interface Circuit (range up to 3KM) With Loop Lengh Measurement Capability For Wireless Base Station Applications ; Package Type = Ssop ; No. Of Pins = 24
MT9196APR - Fully Featured Digital Telephone Circuit With Built-in Filter/CODEC, Digital Gain Pads, DTMF Generator, Tone Ringer, and Handset and Speakerphone Transducers ; Package Type = PLCC ; No. Of Pins = 28
MT9196ASR - Fully Featured Digital Telephone Circuit With Built-in Filter/CODEC, Digital Gain Pads, DTMF Generator, Tone Ringer, and Handset and Speakerphone Transducers ; Package Type = Soic ; No. Of Pins = 28
MT91L60ASR - 3V Multi-featured Phone Codec With Programmable U/a Law Companding ; Package Type = Soic ; No. Of Pins = 20
MT91L61ASR - 3V Multi-featured Phone Codec With Programmable U/a Law Companding ; Package Type = Soic ; No. Of Pins = 24
MVTX2602 - Managed 24 Port 10/100 Mbps Ethernet Switch
MVTX2602A - Managed 24-Port Fast Ethernet Switch The MVTX2602 isA high density, low cost, high performance, non-blocking Ethernet switch chip.A single chip provides 24 ports at 10/100 Mbps, andA CPU interface for managed and unmanaged switch applications.
MVTX2602AG - Managed 24 Port 10/100 Mbps Ethernet Switch
MVTX2602AG2 - Managed 24-Port Fast Ethernet Switch The MVTX2602 isA high density, low cost, high performance, non-blocking Ethernet switch chip.A single chip provides 24 ports at 10/100 Mbps, andA CPU interface for managed and unmanaged switch applications.
MVTX2604A - Managed 24-Port Fast Ethernet + 2 Port 1 Gb Ethernet Switch The MVTX2604 isA high density, low cost, high performance, non-blocking Ethernet switch chip.A single chip provides 24 ports at 10/100 Mbps, 2 ports at 1000 Mbps, andA CPU interface for managed and unmanaged switch applications. The Gigabit ports can also support 10/100 M and 2 G stacking modes.
MVTX2604AG2 - Managed 24-Port Fast Ethernet + 2 Port 1 Gb Ethernet Switch The MVTX2604 isA high density, low cost, high performance, non-blocking Ethernet switch chip.A single chip provides 24 ports at 10/100 Mbps, 2 ports at 1000 Mbps, andA CPU interface for managed and unmanaged switch applications. The Gigabit ports can also support 10/100 M and 2 G stacking modes.
PDSP16488AA0 - Single Chip 2D Convolver With Integral Line Delays ; Package Type = Pga ; No. Of Pins = 84
PDSP16488AAC - Single Chip 2D Convolver With Integral Line Delays ; Package Type = Pga ; No. Of Pins = 84
PDSP16488AACBR - Single Chip 2D Convolver With Integral Line Delays ; Package Type = Pga ; No. Of Pins = 84
PDSP16488AB0 - Single Chip 2D Convolver With Integral Line Delays ; Package Type = Pga ; No. Of Pins = 84
PDSP16488AC0 - Single Chip 2D Convolver With Integral Line Delays ; Package Type = Pga ; No. Of Pins = 84
PDSP16488AGC - Single Chip 2D Convolver With Integral Line Delays ; Package Type = LDCC ; No. Of Pins = 132
PDSP16488AGCPR - Single Chip 2D Convolver With Integral Line Delays ; Package Type = LDCC ; No. Of Pins = 132
PDSP16510AA0 - Stand Alone FFT Processor, Package Type = Pga, No. Of Pins = 84
PDSP16510AAC - Stand Alone FFT Processor, Package Type = Pga, No. Of Pins = 84
PDSP16510AAC1R - PDSP16510AMA - Stand Alone FFT Processor
PDSP16510AB0 - Stand Alone FFT Processor, Package Type = Pga, No. Of Pins = 84
PDSP16510AC0 - Stand Alone FFT Processor, Package Type = Pga, No. Of Pins = 84
PDSP16510AGC - Stand Alone FFT Processor, Package Type = LDCC, No. Of Pins = 132
PDSP16510AGCPR - Stand Alone FFT Processor, Package Type = LDCC, No. Of Pins = 132
PDSP16515AAC - Stand Alone FFT Processor, Package Type = Pga, No. Of Pins = 84
PDSP16515AB0 - Stand Alone FFT Processor, Package Type = Pga, No. Of Pins = 84
PDSP16515AC0 - Stand Alone FFT Processor, Package Type = Pga, No. Of Pins = 84
PDSP16515AGC - Stand Alone FFT Processor, Package Type = LDCC, No. Of Pins = 132
PDSP16515AGCPR - Stand Alone FFT Processor, Package Type = LDCC, No. Of Pins = 132
PDSP16515AMA - Stand Alone FFT Processor, Package Type = LDCC, No. Of Pins = 132
PX5410 - he growing use of the Internet and the increasing demand for storage area network (SAN) solutions has created the need for next generation physical layer ICs. In addition the introduction of 4 G Fiber Channel (4GFC) has introduced the need for next generation ICs to be backwards compatible with 1 G and 2 G Fiber Channel. The Zarlink PX5410 providesA multi-rate VCSEL driver solution for 1, 2, and 4GFC.The Zarlink PX5410 Multi-Rate VCSEL Driver is designed for various applications up to 4.25 Gbps. It consist
PX5419A - he Zarlink PX5419A 12X3 Gbps VCSEL Driver* with ACJTAG isA twelve-channel VCSEL driver designed for various 12x3 Gbps parallel PMD applications. It consists ofA DC-coupled amplifier with selectable modulation and bias currents optimized for driving commercially available, common cathode VCSELs fromA single +3.3V supply.Individual channel settings are used to control the modulation and bias current and their temperature coefficients, allowing the optical output power and extinction ratio to be optimized.
PX5420 - The Zarlink PX5420 optical receiver isA single channel TIA/LA optical receiver designed for various applications to 4.25 Gbps. It consists ofA transimpedance amplifier (TIA) and an AC-coupled differential limiting amplifier (LA).The transimpedance amplifier achievesA nominal bandwidth of 3 GHz overA wide range of photodiode input capacitance.A photodiode bias current monitor allows forA simple alignment procedure.The transimpedance amplifier is AC-coupled internally toA high-gain, high-bandwidth, lim
PX5514 - The Zarlink PX5514 4x4 Gbps VCSEL Driver isA four-channel VCSEL driver designed for various 4x4 Gbps parallel optics and CWDM PMD applications. It consists ofA DC-coupled amplifier with selectable modulation and bias currents optimized for driving commercially available, common cathode VCSELs fromA single +3.3V supply.Individual channel settings are used to control the modulation and bias current and their temperature coefficients, allowing the optical output power and extinction ratio to be optimized.
PX5524 - The growing use of the Internet has created increasingly higher demand for multi-Gbps I/O performance. The demand for 40+ Gbps WAN bandwidth fuels the growth of short-reach 10 Gbps infrastructures within high-end telco and datacom routers, switches, servers and other proprietary chassis-to-chassis links. The Zarlink PX5524 4 Gbps TIA/LA Receiver isA four-channel TIA/LA optical receiver designed for various 4x4 Gbps parallel optics and CWDM PMD applications. It consists ofA DC-coupled transimpedance amplif
PX6410 - The Zarlink PX6410 10 Gbps serial VCSEL driver is designed for various 10 Gbps PMD applications. It consists ofA DC-coupled amplifier with adjustable modulation and bias currents optimized for driving commercially available VCSEL-based transmit optical sub assemblies (TOSAs) fromA single +3.3V supply.VCSEL modulation and bias currents can be programmed byA variety of means including external resistors, programmable potentiometers or microcontroller DAC outputs. Selectable current temperature coefficient
PX6419 - The Zarlink PX6419 12X10 Gbps VCSEL Driver* isA 12-channel VCSEL driver designed for various 12x10 Gbps, 120 Gbps parallel optics and CWDM PMD applications. It consists ofA DC-coupled amplifier with selectable modulation and bias currents optimized for driving commercially available, common cathode VCSELs fromA single +3.3V supply.Individual channel settings are used to control the modulation and bias current and their temperature coefficients, allowing the optical output power and extinction ratio to b
PX6420 - The Primarion® PX6420 10 Gbps receiver isA single channel TIA/LA optical receiver designed for various 10 Gbps PMD applications. It consists ofA transimpedance amplifier and an AC-coupled differential limiting amplifier.The transimpedance amplifier achievesA nominal bandwidth of 8 GHz overA wide range of photodiode input capacitance.A photodiode bias current monitor allows forA simple alignment procedure.The transimpedance amplifier is AC-coupled internally toA high-gain, high-bandwidth, limiting amp
PX6514 - The Zarlink PX6514 4x10 Gbps VCSEL Driver isA four-channel VCSEL driver designed for various 4x10 Gbps parallel optics and CWDM PMD applications. It consists ofA DC-coupled amplifier with selectable modulation and bias currents optimized for driving commercially available, common cathode VCSELs fromA single +3.3V supply.Individual channel settings are used to control the modulation and bias current and their temperature coefficients, allowing the optical output power and extinction ratio to be optimized
PX6524 - The transimpedance amplifier is AC-coupled internally toA high-gain, high-bandwidth differential limiting amplifier. The limiting amplifier providesA differential back-terminated CML output that can be used to drive 10 Gbps per channel transceivers or other CML compatible clock and data recovery circuits. The limiting amplifier features an adjustable signal detect circuit that senses optical modulation amplitude (OMA) to provideA received signal indication for each channel.Features * 4-channel integr
SL2610/IG/LH1N - Wide Dynamic Range Image Reject MOPLL The SL2610 isA multi band RF mixer oscillator with image reject and on-board frequency synthesizer. It is intended primarily for application in all band terrestrial tuners and requiresA minimum external component count. It contains all elements required for RF downconversion toA standard IF with the exception of external VCO tank circuits.Features Single chip mixer/oscillator PLL combination for multi band tuner for DTT applications Each mixer oscillator band optimiz
SL2610/IG/LH1P - Wide Dynamic Range Image Reject MOPLL The SL2610 isA multi band RF mixer oscillator with image reject and on-board frequency synthesizer. It is intended primarily for application in all band terrestrial tuners and requiresA minimum external component count. It contains all elements required for RF downconversion toA standard IF with the exception of external VCO tank circuits.Features Single chip mixer/oscillator PLL combination for multi band tuner for DTT applications Each mixer oscillator band optimiz
SL2610/IG/LH1Q - Wide Dynamic Range Image Reject MOPLL The SL2610 isA multi band RF mixer oscillator with image reject and on-board frequency synthesizer. It is intended primarily for application in all band terrestrial tuners and requiresA minimum external component count. It contains all elements required for RF downconversion toA standard IF with the exception of external VCO tank circuits.Features Single chip mixer/oscillator PLL combination for multi band tuner for DTT applications Each mixer oscillator band optimiz
SL2610/IG/LH1S - Wide Dynamic Range Image Reject MOPLL The SL2610 isA multi band RF mixer oscillator with image reject and on-board frequency synthesizer. It is intended primarily for application in all band terrestrial tuners and requiresA minimum external component count. It contains all elements required for RF downconversion toA standard IF with the exception of external VCO tank circuits.Features Single chip mixer/oscillator PLL combination for multi band tuner for DTT applications Each mixer oscillator band optimiz
SL2610/IG/LH1T - Wide Dynamic Range Image Reject MOPLL The SL2610 isA multi band RF mixer oscillator with image reject and on-board frequency synthesizer. It is intended primarily for application in all band terrestrial tuners and requiresA minimum external component count. It contains all elements required for RF downconversion toA standard IF with the exception of external VCO tank circuits.Features Single chip mixer/oscillator PLL combination for multi band tuner for DTT applications Each mixer oscillator band optimiz
SL2610/IG/LH2N - Wide Dynamic Range Image Reject MOPLL The SL2610 isA multi band RF mixer oscillator with image reject and on-board frequency synthesizer. It is intended primarily for application in all band terrestrial tuners and requiresA minimum external component count. It contains all elements required for RF downconversion toA standard IF with the exception of external VCO tank circuits.Features Single chip mixer/oscillator PLL combination for multi band tuner for DTT applications Each mixer oscillator band optimiz
SL2610/IG/LH2Q - Wide Dynamic Range Image Reject MOPLL The SL2610 isA multi band RF mixer oscillator with image reject and on-board frequency synthesizer. It is intended primarily for application in all band terrestrial tuners and requiresA minimum external component count. It contains all elements required for RF downconversion toA standard IF with the exception of external VCO tank circuits.Features Single chip mixer/oscillator PLL combination for multi band tuner for DTT applications Each mixer oscillator band optimiz
SL2610LH1N - Wide Dynamic Range Image Reject MOPLL
SL2610LH1P - Wide Dynamic Range Image Reject Mopll
SL2610LH1Q - Wide Dynamic Range Image Reject MOPLL
SL2610LH1S - Wide Dynamic Range Image Reject Mopll
SL2610LH1T - Wide Dynamic Range Image Reject Mopll
SL2610LH2N - Wide Dynamic Range Image Reject MOPLL
SL2610LH2Q - Wide Dynamic Range Image Reject MOPLL