Rated Rated
Part Output
Output
Overall
Overall
Ripple
Number
Voltage Current Regulation Regulation
Noise
Efficiency
ADP45WA13.5
13.5 V
2.9 A
0~3.3 A 12.5~14.5 V 450 mVpp
81%
ADP45WA15.0
15 V
2.6 A
0~3 A
14~16 V
400 mVpp
82%
ADP45WA16.0
16 V
2.6 A
0~2.9 A
15~17 V
350 mVpp
83%
ADP45WA19.0
19 V
2.4 A
0~2.4 A
18~20 V
350 mVpp
83%
Single Output, 45 Watt, Universal AC-DC Power Supplies
ADP 45WA Series
The ADP 45WA Series are light, compact, and efficient
power supplies. These supplies are ideal for a wide range of
limited space applications from notebook computers to
industrial instrumentation. The ADP Series quietly delivers
continuous power, while complying with international safety
standards. The ADP Series are enclosed in a modern molded
plastic case.
Features
High Efficiency 81% to 83% Nominal
Ultra Miniature Size, 106mm x 60mm x 25.4mm
Light Weight, 270g
Universal Input, 90 to 265 Vac
Meets FCC & CISPR Level "B" EMI Requirements
Tight Voltage Regulation
Over-Current Protected
Meets Worldwide Safety Standards
3100 Tower Boulevard
5th Floor University Tower
Durham, NC 27707
(919) 402-1320 Fax: (919) 402-8540
INPUT
Input Voltage
Universal, 90 to 265 V
Input Frequency
47 to 63 Hz
Input Current
1.0 A or less
Inrush Current
50 A or less at cold start
Leakage Current
100 A max (240 V, 50 Hz)
Efficiency
81% to 83% nominal, full load
AC Turn-on Time
1.3 sec. at 90 V
OUTPUT
Output Power
45 W
Over-Current Protection
Yes, Constant current
Over-Voltage Protection
Yes, Shut down
Thermal Protection
Yes, Shut down
Reset Time after Shutdown 32 sec. at 240 V
ENVIRONMENTAL
Operating Temperature
0~+40C
Storage Temperature
-20~+80C
Cooling
Free air convection
Storage Humidity
10~90%
Operation Humidity
20~80%
Specifications subject to change without notice.
ADP 45WA Series
SPECIFICATIONS
VIBRATION
Frequency
10~100 Hz
Amplitude
25 mm (max)
Acceleration
0.5 G
Sweep Time
60 sec.
Direction
X,Y, Z
Vibration Time
10 min.
SHOCK
Storage
Passes lifting the unit and
dropping it from 1 meter high
to an oak board.
3 times, with no damage
Operation
Shock acceleration: 2.0 G,
Sine wave: 10 ms
Direction of force: X,Y, Z
Apply 10 times in 1 sec. intervals
EMI Regulations
VCCI Class-II
FCC Class-B (115 V)
CISPR22 Class-B (230 V)
Safety Standards
Dentori
UL 1950, UL 1310
C-UL No. 1950
TUV EN60950
Hi-Pot Test
P-S 3 kv 1 min. (10 mA or less)
Insulation Resistance
P-S DC 500 V, 50 M
or more
1800 mm
+100
-0
16.5 mm
28 mm
5.5 mm
2.1 mm
106 mm
60 mm
16.5 mm
25.4 mm
13 mm
30 mm
12.4mm
30 mm
9.5 mm
2.5 mm
PDF 
ZIP