ULTRA-BROADBAND DROP-IN REMOVABLE CONNECTORS REFLECTIVE
SP4T DIODE SWITCH MODEL SWM-1400
0.518.0 GHz
GENERAL INFORMATION
The Model SWM-1400 SP4T PIN Diode switch operates over the full fre-
quency range 0.518.0 GHz in a single unit. KDI/Triangle has integrated
microstrip soft substrate with thick film hybrid drivers, which are designed
and fabricated "in-house".
The housing is epoxy sealed to meet the gross leak requirements of
MIL-STD-883. SMA connectors are removable.
GENERAL SPECIFICATIONS
Model: SWM-1400
Frequency Range: 0.518 GHz
DC Requirements: 5V DC at 175 mA
Logic: TTL Compatible, Logic "0" enables thru
path
Temperature: 55 to 85C, operating
65 to +125C, storage
Switching Speed: 135 nsec. maximum
50%T
2
L to 90%/10% RF
Rise/Fall time= 50 nsec. Maximum
VSWR:* 2:1 maximum (on only)
RF Power: 20 dBM maximum
SMA Connectors: Removable
Frequency Isolation Insertion Loss*
(GHz) (dB minimum) dB maximum
0.5-18 60 3.0
INSERTION LOSS
ISOLATION
New!
Absorptive Model SWM-1400A available, insertion loss is 3.7dB
maximum and the VSWR is 2.0:1 maximum under all conditions, "on/off"
11-5-02
KEY: Inches[Millimeters] .XX .03 .XXX .010 [.X 0.8 .XX 0.25]
60 South Jefferson Road, Whippany, NJ 07981
Tel: 973-887-8100 Fax: 973-884-0445
email: sales@mcekdi-integrated.com
See us on the web @ www.mcekdi-integrated.com
PDF 
ZIP